AT45DB641E-SHN-B-RENESAS-Flash Memory, DataFlash, Serial NOR, 64Mbit, 32K Pages x 264Byte, SPI, WSOIC-8

Availability:

In stock


SKU: R110172
  1. : Serial NOR
  2. : 64Mbit
  3. : SPI
  4. : 8Pins
  5. : 85MHz
  6. : 1.7 to 3.6V
  7. : Surface Mount
  8. : -40 to 85°C

 544.00 (Incl. GST)

In stock

Purchase this product now and earn 6 Robu Points!

Free Delivery above ₹499
Free Delivery
above ₹499
1 Year Warranty
15 Days Warranty
Cash On delivery
Cash on Delivery*

Didn’t find what you are looking for?

Brand: RENESAS
Category: Memory IC

The AT45DB641E is a 1.7V minimum, serial-interface sequential access Flash memory ideally suited for a wide variety of digital voice, image, program code, and data storage applications. The AT45DB641E also supports the RapidS serial interface for applications requiring very high speed operation. Its 69,206,016 bits of memory are organized as 32,768 pages of 256 bytes or 264 bytes each. In addition to the main memory, the AT45DB641E also contains two SRAM
buffers of 256/264 bytes each. Interleaving between both buffers can dramatically increase a system’s ability to write a continuous data stream. In addition, the SRAM buffers can be used as additional system scratch pad memory, and E2 PROM emulation (bit or byte alterability) can be easily handled with a self-contained three step read-modify-write operation.

Unlike conventional Flash memories that are accessed randomly with multiple address lines and a parallel interface, the DataFlash® uses a serial interface to sequentially access its data. The simple sequential access dramatically reduces active pin count, facilitates simplified hardware layout, increases system reliability, minimizes switching noise, and
reduces package size. The device is optimized for use in many commercial and industrial applications where high-density, low-pin count, low-voltage, and low-power are essential.
To allow for simple in-system re-programmability, the AT45DB641E does not require high input voltages for programming. The device operates from a single 1.7V to 3.6V power supply for the erase and program and read operations. The AT45DB641E is enabled through the Chip Select pin (CS) and accessed via a 3-wire interface consisting of the Serial Input (SI), Serial Output (SO), and the Serial Clock (SCK). All programming and erase cycles are self-timed.


Features:

  1. Single 1.7V – 3.6V supply
  2. Program and Erase Suspend/Resume
  3. Hardware and software controlled reset options
  4. JEDEC Standard Manufacturer and Device ID Read
  5. Endurance: 100,000 program/erase cycles per page minimum
  6. Data retention: 20 years
  7.  Complies with full industrial temperature range

Package Includes:

1 x AT45DB641E-SHN-B-RENESAS-Flash Memory, DataFlash, Serial NOR, 64Mbit, 32K Pages x 264Byte, SPI, WSOIC-8

SKU: R110172 Category:
Manufacturer:

RENESAS

Flash Memory:

Serial NOR

Interface:

SPI

No. of Pins:

8

Supply Voltage (V):

1.7 to 3.6

IC Mounting

Surface Mount

Operating Temperature (°C)

-40 to 85

Shipping Weight 0.03 kg
Shipping Dimensions 9 × 7 × 2 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects. Replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “AT45DB641E-SHN-B-RENESAS-Flash Memory, DataFlash, Serial NOR, 64Mbit, 32K Pages x 264Byte, SPI, WSOIC-8”

There are no reviews yet.

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China