The SafeConnect Flat 30CM 22AWG Servo Lead Extension (JR) Cable are stronger & allow more current than standard servo wires. Great for larger planes with servos that experience high loads.
These cables are available in the various size for making connection such as between RC servo controllers or RC receivers and motor controllers with an RC interface. These Servo Lead Extention comes with “JR”-style connectors. This has a male connector on one side and one female connector on another side.
These High-Quality silicon cables are soldered and crimped male-female plugs at both ends. A high-quality secure servo connection, every time!
It can also be a convenient way to connect various 3-pin sensors to a robot controller.
Connection:
- Red Wire: Vcc(+)
- Brown Wire: Ground(-)
- Yellow Wire: Signal
Features:
- High-Quality cable
- One male and one female connector.
- Flat 30 cm Servo Lead Extention (JR)
- Quality wire and connectors used.
- Great for larger planes with servos that experience high loads.
Package Includes:
1 x SafeConnect Flat 30 CM 22AWG Servo Lead Extention (JR) Cable
ashishmatheww95 (verified owner) –
Pros-
1.High quality
2.Flexible
3.Safe connect,prevents reverse polarity connection
3.Decently tight connector
Cons
1. Heavier
2.To connect to normal towepro 9g Servo, the servos connector needs to be sanded down on the edges ro be able to connect to the extention as there is to small ridges for safe connect,aka the safe connecters have camfered edges for the male end,so it needs to be camfered on the servo male connecter as well
Advice:
If you are just using a small servo like 9-13g then it is best to go for 26AWG as this is lighter and capable enough, only for bigger servos and ESCs is 22AWG recommended.
Peace.
ashishmatheww95 –