MakerBase MKS SKIPR(ONLY BOARD)

MakerBase MKS SKIPR(ONLY BOARD)

MKS SKIPR is an integrated seven-axis motherboard launched by Makerbase for running Klipper firmware. The motherboard integrates the SOC running the Klipper host and the MCU responsible for executing specific machine actions, which meets the use of most 3d printers.

Features:

1. The SOC uses Rockchip’s 4-core Cortex-A53 architecture RK3328 with Armbian system to run the Klipper host perfectly;
2. The MCU uses the STM32F407VET6 of the Cortex-M4 architecture, with a main frequency of 168Mhz, which can easily control various machine actions;
3. Retain the rich interface resources of MKS PI [with 1GBytes of DDR3 memory, support HDMI screen interface, PI-TS35 screen interface, provide wired Ethernet port, 3-way USB interface (can be externally connected to the main control board, USB wireless network card, USB camera) , U disk, USB keyboard and mouse, etc.];
4. Support to start the system from TF card and EMMC module (EMMC module is more stable than TF card, and its reading and writing speed is also faster), and provide supporting EMMC burning tools;
5. Support 7-axis stepper drive to meet the requirements of most 3D printer models;
6. 3 independent MP1584PEN DC/DC modules provide a strong guarantee for the stable operation of the entire board circuit
7. 3-way controllable fans, plus 3-way normally open output, can independently select VIN, 12V or 5V voltage
8. Design Schottky diode protection for MOS circuits and temperature measurement circuits
9. Design a back EMF energy absorption circuit to protect the stepper drive module
10. The Z+ interface can independently set the voltage selection to adapt to different types of PROBE

Package Includes:

1 x MakerBase MKS SKIPR(ONLY BOARD)

1 x USB Cable (C-Type)