GROW-KL216 Fingerprint Control Board

The KL216 Fingerprint Control Board, encased in a durable aluminum housing (784821mm), is designed to support up to 200 fingerprints. It operates on a power supply of DC10-30V with a standby current of less than 40mA and provides a relay output with a maximum current of 10A. Compatible with R502-A, R502-AW, R502-F, and R503 fingerprint modules, it offers a reliable and secure access control solution.

Instructions for control board

1.SET Button:

1.1 Press SET button shortly,system in register state and indicator light flash fast, press multiple times for each fingerprint, fingerprint register successful when hearing music.

Fingerprint can be registered continuously when system in register state; if no need adding fingerprint more, waiting a few seconds.(By default, it will be saved in fingerprint database 1,when the current database is full, it is automatically saved to the next database.)

1.2 When back to factory default, press SET button until hear “Di” long beep and

music,means initialization operation successful 

2.Remote Control:

      When using remote control, pls touch the module to wake up first.

2.1  Blue indicator lighted means in programming stated, music means operation successful, default  password: 123456, password length: 6 numbers

2.2  Change password: Press *password*1*new password*new password#

2.3  Register fingerprint: Press *password*2*Database(1-5)# ,Exit fingerprint in register state when press * button or waiting a few seconds.

E.g.: Register in Database 3: Press *password*2*3#

2.4.  Delete Fingerprint:Press *password*3*Database(1-5)# 

E.g.: Delete in Database 3: Press *password*3*3#

2.5.  Relay Time Setting in jog mode:Press *password*4*Time(0.5s-99s)#

E.g.: Set 0.5s: Press *password*4*00#

E.g.: Set 1s: Press *password*4*01#

E.g.: Set 5s: Press *password*4*05#

E.g.: Set 99s: Press *password*4*99#

2.6.  Setting Work Mode: 

Jog Mode: Press *password*5*1#

Ignition Mode: Press *password*5*2#

Self-locking Mode:Press *password*5*3#

2.7.  Standby Mode Selection:

Standby Mode On: Press *password*6*0#

Standby Mode Off: Press *password*6*1#

2.8.  Back to Factory Mode: Press *password*7*password#

2.9.  Password Using: Press *password and relay closed, press # and relay opened

Features:

1. Durable aluminum case
2. Low power consumption
3. High fingerprint storage capacity
4. Robust relay output
5. Wide compatibility with fingerprint modules
6. Reliable and secure access control
7. Can be connect with R502-A,R502-AW,R502-F,R503 

Package Includes:

1 x KL216 Fingerprint Control Board