This is the CP2102(6-pin) USB 2.0 to TTL UART serial converter module. This is a great little tool for embedded systems that require a serial connection to a computer. The board can simply attach to a USB bus and will appear as a standard COM port.
ThisCP2102 doesn’t require any external oscillator, it onboard-board voltage regulator, and it even uses a reprogrammable internal EEPROM for the device description. The full hardware UART has flow control for baud rates from 300bps to 921600bps.
This breakout also allows you to connect the TX/RX pins of your favorite microcontroller or serial application to the RX/TX pins of the breakout, creating a simple serial cable replacement.
Supported operating systems
Windows 98/Me/2000/7
MAC OS-9
MAC OS
X-Windows CE
Linux 2.40 or later
Features :
- Brand new and high quality
- Included USB transceiver, without external circuit device
- Includes a clock circuit and power-on reset circuit
- With 3.3V and 5V dual power output
- With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
- Meet the USB2.0 specification requirements
- SUSPEND pin supports USB suspend state
- With self-recovery fuse. In the event of the accidental short circuit, it can effectively protect your computer USB port and Downloader
- With reset signal output, etc. directly to the Arduino board Promini download!
- Asynchronous serial data bus compatible with all handshake and modulation controller interface signals
- The supported data format is 8 data bits, 1 stop bit and parity bits
- Connotation 512 byte receive buffer and 512 bytes transmit buffer
- Supports hardware handshaking or X-ON/X-OFF
hvs prasad (verified owner) –
out of 10
1 no not working
hc-12 out of 10
3 nos not working
hvs prasad –
anilkchandra (verified owner) –
It works!
anilkchandra –
Sharanu kotagi (verified owner) –
Nice Product
Sharanu kotagi –
Abhijeet (verified owner) –
Product is good
Abhijeet –
rajesh.acorn (verified owner) –
Good product
rajesh.acorn –
Rajesh Yadav (verified owner) –
Good product
Rajesh Yadav –
Subho (verified owner) –
Good Module, proper silk screened texts, prompt delivery, thanks
Subho –
Ayan Vaidya (verified owner) –
totally recommended works perfectly just that as it’s usb plug you may need usb male to female cable or jumper wires to work with ease
Ayan Vaidya –
Dr. Phool Singh Chauhan (verified owner) –
Very prompt delivery. Product is superb. Worked in first attempt. I tested by programming Arduino Pro Mini 5V @16MHz board without any problem. Thanks for providing such a nice product at extremely low price.
Dr. Phool Singh Chauhan –
Nikhil Bakre (verified owner) –
Excellent delivery,Surprised to see them follow delivery instructions perfectly. Nice converter. Worked the first time connected without any hassles.
Nikhil Bakre –
MS (verified owner) –
Highest quality product, with incredibly fast delivery. Recommended.
MS –
Aravind M.A (verified owner) –
Works very well on both 3.3V and 5V withouht requiring external pull up. Pins are 90 degree and convenient for usage. Drivers have to be downloaded online. Tested and works on windows 10
Aravind M.A –
Akshay KG (verified owner) –
Good product <3
Akshay KG –
VIMAL PANDYA (verified owner) –
good
VIMAL PANDYA –
avishekganguly.26 (verified owner) –
Nice product. Really fast delivery.
avishekganguly.26 –
Abhay B –
Good Converter
Low cost
Thank You, robu.in
Abhay B –