BIGTREETECH BTT Octopus Pro V1.0.1 (F429)

BIGTREETECH BTT Octopus Pro V1.0.1 (F429) is a very powerful motherboard with 8 stepper driver support, so this motherboard can control up to 8 different axes. This feature is particularly suitable for multi-color printing and tool changers, for the use of different tools/modules such as different 3D print heads, laser engraving, laser cutting etc. All fantasies and ideas of modifications can be realized. BIGTREETECH Octopus Pro V1.0.1 (F429） is compatible with Klipper, RepRap and Marlin and supports Raspberry Pi and Octoprint.

Note: Refer to datasheet in the ATTACHMENTS section for more information.

Features:

1. 8 powerful stepper drivers provide more stable operation
2. 5V level for stepper motor drivers and 60V motor input voltage contribute to better performance and reduction of pulse loss
3. Up to 6 controllable fans, two normally open fans, and both support power supply voltage, 12V, 5V options
4. Supports proximity sensor, jumper optional pull-up resistor, supports more models, supports BL Touch
5. Supports updating by USB and DFU mode
6. 6 Controllable Fans: BIGTREETECH Octopus Pro v1.0 features with 6 controllable fans, and two without control,with the possibility of selecting power supply voltage between Vin, 12V, and 5V. Flyback protection on PWN fan ports are effectively against short circuits in the fan sockets to prevent damages on fans.
7. 8 High Voltage Drivers: BTT Octopus Pro V1.0 3D printer control board provides space for up to 8 stepper drivers on Octopus Pro controller board in STEP/DIR, UART or SPI mode, which can control up to 8 different axes. It’s especially suitable for multi-colour printing and tool changer. Added high voltage (HV) drivers support input voltage 12V-maximum 60V (only for the motor drive power supply).
8. Super Wide Compatibility: Big tree tech Octopus Pro V1.0 motherboard supports all versions of BIGTREETECH TFT screens, LCD2004 and LCD12864. This 32Bit 3D printer controller board also supports material interruption detection, continuous printing after power failure, shutdown after printing, BL Touch, etc.
9. Update Firmware via DFU: Supports updating by USB and DFU mode. Supports firmware update via DFU mode. Updating it through DFU will allow us to upload the firmware or bootloader in case the normal process does not work while using USB-C cables. However, It’s NOT recommended for novice users. 

Package Includes:

1 x BIGTREETECH Octopus Pro V1.0.1 (F429）

1 x Type C USB Cable and accessories