xbee
Showing all 12 results
-
xBee Zigbee modules
Zigbee XBee Module S2C 802.15.4 2mW with Wire Antenna XB24CZ7WIT-004
SKU: 2829- Integrated, Wire Antenna
- Interoperable with other ZigBee-compliant devices
- Programmable versions with onboard microprocessor enable custom ZigBee application development
- Supports binding and multicasting for easy integration into a home automation platform
- Data Rate: RF 250 Kbps, Serial up to 1 Mbps
- Range: Indoor 200 ft (60 m), Outdoor (LOS) 4000 ft (1200 m)
- Transmit Power: 3.1 mW (+5 dBm)
- Channels: 16 channels
SKU: 2829xBee Zigbee modulesZigbee XBee Pro S2C 802.15.4 Module 63mW 3Km+ 3.2dBi Antenna
SKU: 30511- Supports binding and multicasting for home automation
- Mesh-network topology
- 2.4 GHz for worldwide deployment
- Common XBee footprint fits Parallax XBee Adapters and the Propeller Activity Board
- Firmware upgrades via UART, SPI or over the air
- TRANSCEIVER CHIPSET: SiliconLabs EM357 SoC
- DATA RATE: 250kbps Max
- RATED OUTDOOR/RF LINE-OF-SIGHT RANGE: Up to 2 mile (3200m)
SKU: 30511xBee Zigbee modulesXBee Pro S2C 63mW 802.15.4 Module without Antenna
SKU: 527306- Supports binding and multicasting for home automation
- Mesh-network topology
- 2.4 GHz for worldwide deployment
- Common XBee footprint fits Parallax XBee Adapters and the Propeller Activity Board
- Firmware upgrades via UART, SPI or over the air
- TRANSCEIVER CHIPSET: SiliconLabs EM357 SoC
- DATA RATE: 250kbps Max
- RATED OUTDOOR/RF LINE-OF-SIGHT RANGE: Up to 2 mile (3200m)
SKU: 527306xBee Zigbee modulesXBee USB Adapter FT232RL for Arduino with Cable
SKU: 51765- Microprocessor:Â FT232RL.
- Power supply:Â 3.3V and 5V DC.
- Interface:Â Mini-B USB, 2.54mm pitch pin header.
- Adapter socket:Â XBee compatible 2.0mm pitch female pin header.
- 3.3V and 5V IO compatible.
- USB 2.0 protocol.
- Easily connected to a PC via mini USB cable.
- XBee compatible 2.0mm pitch female pin header.
SKU: 51765xBee Zigbee modulesXBee USB adapter (CP2102)
SKU: 2831- Compatible with all ZigBee modules (Series 1 and Series 2.5, standard and Pro)
- The built-in 3V3 Voltage regulator
- Onboard 3V3 <->5V level converter (easy to interface 5V Devices)
- Status LEDs ( RX,TX,RSSI,Power)
- Zig Bee Pins available at 2.54 mm berg strip
- All XBee pins are broken out.
- Reset button.
SKU: 2831Shield for ArduinoXBee Shield V03 Module Wireless Control
SKU: 12197- Stackable design, easy to plug into the ARDUINO development board.
- Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.
- 3.3v and 5v dual power output.
- 3.3v and 5v IO compatible.
- USB2.0 protocol.
SKU: 12197xBee Zigbee modulesDigi XBee3 2.4GHz ZB3.0 PCB Antenna
SKU: 130679- Serial Data Interface: Uart, Spi, I2c.
- Configuration Method:Â API Or At Commands, Local Or Over-the-air.
- Frequency Band: ISM 2.4 GHz.
- Form Factor: Micro, Through-hole, Surface Mount.
- Interference: Immunity Dsss (Direct Sequence Spread Spectrum).
- Adc Inputs: (4) 10-bit Adc Inputs.
- Digital I/o: 15.
SKU: 130679xBee Zigbee modulesDigi XBee3 2.4GHz ZB3.0 RP-SMA Female Antenna
SKU: 130541- Serial Data Interface: Uart, Spi, I2c.
- Onboard Connector: RP-SMA Female.
- Configuration Method:Â API Or At Commands, Local Or Over-the-air
- Frequency Band: ISM 2.4 GHz
- Interference: Immunity Dsss (Direct Sequence Spread Spectrum)
- Adc Inputs: (4) 10-bit Adc Inputs
- Digital I/o: 15.
SKU: 130541Shield for ArduinoCytron XBee Shield
SKU: 7981-
Mounts directly onto your Arduino
-
DIN and DOUT pins of XBee can be connected to either the USB’s UART pins or another digital pin on the Arduino (D0, D1, D2, D3, D8, D9, D10, D11)
-
3.3V power regulation and proper level shifting on-board communication between 5V and 3.3V
-
Extra 0.1″ spaced prototyping holes
-
Reset button brought out to shield
-
Power, DIN, DOUT, RSSI, and DIO5 indicator LEDs
SKU: 7981xBee Zigbee modulesDigi XBee3 PRO 2.4GHz ZB3.0 RP-SMA Female Antenna
SKU: 130675- Serial Data Interface: Uart, Spi, I2c.
- Onboard Connector: RP-SMA Female.
- Frequency Band: ISM 2.4 GHz.
- Interference: Immunity Dsss (Direct Sequence Spread Spectrum).
- Adc Inputs: (4) 10-bit Adc Inputs
- Digital I/o: 15
SKU: 130675Shield for ArduinoXBee IO Expansion Shield – XBEE 2
SKU: 10038- Expand 14 digital IO interface (12 steering gear interface)and power
- Six analog IO interfaces and power
- One digital port interface for external power supply terminals
- Digital port external power supply and on-board electrical automatic switch
- One external power input terminals and one input needle
- RS485 interface (D0-RX, D1-TX, D2-EN)
- IIC/the I2C/TWI interface (A4-SDA, A5-SCL)
- SD card module interface
SKU: 10038
Robu.in wants to send you updates. Click Allow to subscribe.
