USB
Showing all 31 results
-
Best Prices, Cables for Arduino, Interfacing and USB Cables
Cable For Arduino UNO/MEGA (USB A to B)-50 cm
-28%
Best Prices, Cables for Arduino, Interfacing and USB CablesCable For Arduino UNO/MEGA (USB A to B)-50 cm
SKU: 7701- USB Type: Type-A to Type-B
- Weight: 25 gm.
- Length: 50 cm.
- Fully compatible with the PC.
- Aluminum under-mold shield helps meet FCC requirements on KMI/RFI interference.
- Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference
SKU: 7701Best Prices, USB Interface ModuleUSB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino
-38%
Best Prices, USB Interface ModuleUSB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino
SKU: 9707- Standard interface layout, compatible with a variety of Arduinos such as the Pro Mini
- Original FTDI FT232 chip, stable performance
- USB power has current protection, using 500MA self-restore fuse
- RXD/TXD transceiver communication indicator
- With power, sending, receiving indicator, working status LED indicators
- Mini USB Port Connection
- Support 3.3V, 5V
SKU: 9707Best Prices, USB Interface ModuleCP2102(6-pin) USB 2.0 to TTL UART serial converter
SKU: 29760- Brand new and high quality
- Included USB transceiver, without external circuit device
- With 3.3V and 5V dual power output
- With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
- Meets the USB2.0 specification requirements
- With self-recovery fuse. In the event of the accidental short circuit, it can effectively protect your computer USB port and Downloader
- Asynchronous serial data bus compatible with all handshake and modulation controller interface signals
- The supported data format is 8 data bits, 1 stop bit and parity bits
SKU: 29760Best Prices, USB Interface ModulePL2303 TA Download Cable USB to TTL RS232 Module USB to Serial
-17%
Best Prices, USB Interface ModulePL2303 TA Download Cable USB to TTL RS232 Module USB to Serial
SKU: 28424- Built-in TTL COM PC-PL2303HX Chip.
- Standard USB type and TTL 4 pin connector
- Simple and Easy way to give USB support to your designs
- Available for Linux, Mac, WinCE, and Windows (XP, 7), Win 8
- Cable Length: 1M
- Net Weight: 30gm
SKU: 28424Best Prices, USB Interface ModuleUSB to RS485 Converter Adapter Support WIN7 XP Vista Linux Mac OS
-34%
Best Prices, USB Interface ModuleUSB to RS485 Converter Adapter Support WIN7 XP Vista Linux Mac OS
SKU: 43951- Fully compliant USB 2.0 standard, backward compatible with USB1.1
- Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
- Baud Rate Range: 75bps – 115200bps, up to 6Mbps
- Supports Plug, Play and hot-swap ( USB side)
- Better than using CH341D chip or similar chip to support the laptop USB port.
- Communication distance up to 1.2KM
SKU: 43951Best Prices, USB Interface ModuleCH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi
-29%
Best Prices, USB Interface ModuleCH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi
SKU: 24628- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output, easy to connect to your MCU.
- Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
- The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
- Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit system)
SKU: 24628AVR Microcontroller Board, Best PricesATTINY85 USB Development Board
SKU: 31126- Support for the Arduino IDE 1.0 + (OSX/Windows/Linux).
- Power via USB or External Source or 7-16 v to 5 v (automatic selection).
- The Onboard, 150 ma 5 v Regulator.
- Built-in USB and serial were debugging).
- 6 I/O Pins (2 inform the for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
- 8 k Flash Memory (about 6 k after bootloader).
- The I2C and SPI (vis USI).
- The Power LED and the Test/Status LEDs.
SKU: 31126USB Interface ModulePL2303 PL2303HX USB To TTL(Serial) Converter Module – 5 Pin
SKU: 44534- Adopt imported controller PL2303HX, which can stabilize the flash with high speed
- 500mA self-recovery fuse for protection
- Two data transmission indicator can monitor data transfer status in real time
- Reserve 3.3V and 5V pin interface, easy for the DDWRT of different voltage system that needs power
- The entire board is coated by the high quality transparent heat-shrinkable sleeve, making the PCB in insulation state from outside,
- so that the board won’t be burnt down by material shortcut.
- Electrostatic package ensures the board will not be damaged before use
SKU: 44534USB Interface ModuleUSB to RS485 TTL Serial Converter Adapter FT232
SKU: 28453- Baud rate: 300 – 9216000bps, automatically detecting the serial signal data rate
- Load capacity: support multipoint, each converter allows RS485 interface device to connect 32
- Interface Protection: TVS tube protection, USB self-recovery protection
- Support Windows98/ME/2000/XP/WIN7/Vista, Linux, Mac
- It can be up to 32 devices on the bus.
SKU: 28453Cables for Arduino, Interfacing and USB CablesOut of stock
Cable For Arduino UNO/MEGA (USB A to B) 3.11 feet
Cables for Arduino, Interfacing and USB CablesCable For Arduino UNO/MEGA (USB A to B) 3.11 feet
SKU: 28129- USB Type: Type-A to Type-B
- Weight: 80 gm.
- Length: 3.11 feet (120 cm)
- Gold Plated Connector
- Fully compatible with the PC.
- Molded strain relief and PVC over molding to ensure a lifetime of error-free data transmissions.
SKU: 28129USB Interface ModuleUSB To Serial Adapter Module USB TO TTL RS232 Arduino Cable With CTS RTS
SKU: 43433- The TTL-232R cables are a family of USB to TTL serial UART converter cables incorporating FTD’s.
- UART interface IC device which handles all the USB signaling and protocols. The cables provide a fast, simple way to connect.
- Devices with a TTL level serial interface to USB.
- Each TTL-232R cable contains a small internal electronic circuit board, utilizing the FT232R, which is encapsulated into the USB.
- the connector end of the cable. The other end of the cable comes with a selection of different connectors supporting various applications.
- The USB side of the cable is USB powered and USB 2.0 full speed compatible.
- Each cable is 1.0m long and supports a data transfer rate up to 3 M baud.
SKU: 43433AVR Microcontroller BoardDigispark ATTINY85 Mini USB Development Board
SKU: 31117- High Performance, Low Power AVR® 8-Bit Microcontroller
- Non-volatile Program and Data Memories
- 512 Bytes In-System Programmable EEPROM
- 512 Bytes Internal SRAM
- USI – Universal Serial Interface (12C, SPI, 1-wire) with Start Condition Detector
- 10-bit ADC
- 4 Single Ended Channels
- Two Differential ADC Channel Pairs with Programmable Gain (1x, 20x)
- Low Power Consumption
- Active Mode:1 MHz, 1.8V: 300 µA
SKU: 31117Audio Amplifier ModuleUSB To 3.5mm Mic and Headphone Jack Stereo Headset Audio Adapter USB Sound Card 7.1
Audio Amplifier ModuleUSB To 3.5mm Mic and Headphone Jack Stereo Headset Audio Adapter USB Sound Card 7.1
SKU: 51861- One male USB plug
- Two 3.5mm (3-position) Female Jacks (1 for the mic, 1 for headset)
- Specifically for mic-capable headphones
- Convenient tangle-free flat cable design
- Allows the use of older audio accessories with newer computers
- Can be used with any device which uses USB portable devices
SKU: 51861Cables for Arduino, Interfacing and USB CablesOut of stock
USB A to Type B Cable for Arduino Mega and Uno-High Quality
Cables for Arduino, Interfacing and USB CablesUSB A to Type B Cable for Arduino Mega and Uno-High Quality
SKU: 7703- USB Type: Type-A to Type-B
- Weight: 80 gm.
- Length: 1.4 m.
- Fully compatible with the PC.
- Molded strain relief and PVC over-molding to ensure a lifetime of error-free data transmissions.
SKU: 7703USB Interface ModulePL2303HXD 6Pin USB TTL RS232 Convert Serial Cable
SKU: 43645- Supports RS-232 serial interface with Programmable baud rate from 75 bps to 12 Mbps
- Compatible with the RS422/RS485 interface
- Extensive flow control mechanism like adjustable high/low watermark level, automatic hardware or software flow control, and inbound data buffer overflow detection.
-
The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB
- The TTL-232R cables are a family of USB to TTL serial UART converter cables incorporating FTD’s FT232RQ USB to Serial
- Cables are FCC, CE, RoHS compliant and are available at TTL levels 3.3V
-
It is USB 2.0 full speed compatible. The USB side of the cable is USB powered.
SKU: 43645Shield for ArduinoADK USB Host Shield compatible with Arduino
SKU: 3366- Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards.
- Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host)
- Supports HID devices, such as keyboards, mice, joysticks, etc.
- Compatible with Mass storage devices, such as USB sticks, memory card readers, external hard drives (FAT32 Type File System – Mega Arduino only).
SKU: 3366Interface ConnectorSATA III SATA to USB Adapter Cable Supports up to 6 Gb/s
SKU: 456159- SATA 3.0 cable for SATA to USB data transfer.
- Ideal for 2.5″Â HDD and SSD external hard drive
- Data transfer with a speed of 6Gb/s or 600 Mb/s.
- Indicating LEDs for activity tracking.
- USB 3.0. It also supports USB 2.0/1.1.
- Cable Lenght: 25cm
SKU: 456159USB Interface ModuleOut of stock
USB To UART TTL Serial CP2102 Module STC Download Cable Pl2303 for Arduino
USB Interface ModuleUSB To UART TTL Serial CP2102 Module STC Download Cable Pl2303 for Arduino
SKU: 11555- Chipset: CP2102
- Power: USB, 3.3V (<40mA), 5V, GND, TX, RX
- Baud Rate: 300bps to 1Mbps.
- Signal Levels: 3.3V, positive logic.
- OS Support: Windows, Mac OS, Linux.
- Format Support: 5-8 data bits, 1/2 stop bits
SKU: 11555Cytron Motor DriversUSB ICSP PIC Programmer – UIC00B
SKU: 10053- Program most of the +3.3V or +5V PIC
- Compatible with PICkit2’s UART Tool and Logic Tool
- The program most of the current 8-, 16-, and 32-bit Flash PIC microcontroller
-
Compatible with Windows XP, Vista, 7, 8 and 8.1.
-
Compatible with Microchip’s PICkit 2.
-
Powered directly from the USB port.
-
NO EXTERNAL POWER REQUIRED for UIC00B to function.
-
Compatible with PICkit2’s Logic Tool and UART Tool.
SKU: 10053(ESC) Drone Speed ControllerOut of stock
New ESC USB Linker Programmer For Simonk BLHeli Firmware SN/BL/16A/20A/30A/40A
(ESC) Drone Speed ControllerNew ESC USB Linker Programmer For Simonk BLHeli Firmware SN/BL/16A/20A/30A/40A
SKU: 127286- Direct plug design,
- Works with most USB port and USB extension cable
- Â Low power consumption design
- Onboard 2×3 Pin AVR ISP port
- Â 3pin servo connector can be used as servo or C2 connection
- Supports SIMONK and BLHELI ESC, KKflashtool compatible
- KKflashtool and RapidFlash compatible
Â
Â
SKU: 127286Cables for Arduino, Interfacing and USB CablesOut of stock
Cable For Arduino Nano USB A to MINI B (Gold Plated Connector)
Cables for Arduino, Interfacing and USB CablesCable For Arduino Nano USB A to MINI B (Gold Plated Connector)
SKU: 74767- USB Type: Type-A to Mini-B
- Weight: 100 gm.
- Length: 1.5 m.
- Gold Plated Connector
- Exclusively designed for Arduino boards.
- These fully rated Mini-USB cables provide transfer rates up to 480 Mbps.
SKU: 74767USB Interface ModuleUSB PIC Programmer – UP00B
SKU: 10109- USB powered, no extra power needed to load program
- Two ZIF sockets (20 pins and 40 pins) to ease the program loading process
- Support most 8pin, 18pin, 28pin and 40pin PDIP 8 bit PIC MCU
- Support Windows XP, Vista, 7 (32 and 64-bits)
- Support Intel and AMD based system
- Support Laptop and desktop PC
SKU: 10109
Robu.in wants to send you updates. Click Allow to subscribe.
