SmartElex
Showing all 33 results
-
SmartElex Movement Sensors
SmartElex 6 Degrees of Freedom Breakout – LSM6DSO
SKU: R101054- Accelerometer measurement range: ±2/±4/±8/±16 g full scale
- Gyro measurement range: ±125/±250/±500/±1000/±2000 dps full scale
- Embedded temperature sensor: 16-bit resolution
- Operating voltage range: 1.71V to 3.6V / Typically 3.3V
SKU: R101054USB Interface ModuleSmartElex IOIO OTG for Android
SKU: 86932- Recommended Input Voltage: 12V
- Input Voltage Range: 5-15V
- 2 Pin 2mm SMD JST Right-angle Connector for Input supply
- On-board TPS62133RGTT Synchronous step down DC-DC converter.
- Power Status LED (RED)
- Micro USB for Communication with Android.
- One start LED connected to boot pin (RC12 =Pin no. 39).
- User Switch SW1, SW2 connected to any port pin through SW1, SW2 Jumper respectively.
SKU: 86932SmartElex Movement SensorsSmartElex Triple Axis Accelerometer Breakout – KX134
SKU: R101058- High Resolution (8 or 16-bit)
- User-Configurable Output Data Rate (ODR) up to 25600Hz
- Digital I2C up to 3.4MHz and Digital SPI up to 10MHz
- SPI available on PTH Header Pins
- I2C Address: 0x1E (0x1F alternate)
SKU: R101058SmartElex Movement SensorsSmartElex Triple Axis Accelerometer Breakout – BMA400
SKU: R101057- Supply voltage range: 1.72 – 3.6V
- Ultra-Low current consumption: < 14.5µA at highest
- performance settings: I2C interface, SPI interface (disabled by default)
- I2C addresses: 0x14 (Default), 0x15
- Selectable acceleration ranges: o ±2/±4/±8/±16g
SKU: R101057SmartElex Current SensorsSmartElex Current Sensor Breakout – ACS723 (Low Current)
SKU: R101038- DC and AC currents : 10mA up to 5A
- Full electrical isolation of measured and sensed circuits
- The version without the op-amp has a base sensitivity of 400mV/A
- Adjustable sensitivity with on-board amplifier, gain from 2.2 to 22 V/V
SKU: R101038
Robu.in wants to send you updates. Click Allow to subscribe.
