RGB
Showing all 12 results
-
Best Prices, LED Module
CJMCU-123 WS2812 RGB LED Breakout Module
SKU: 44120- Supply Voltage: 5V.
- Viewing angle: 120 degrees
- The color of the light was highly consistent
- Full-color module, Full-color soft lights a lamp strip.
- Built-in electric reset circuit and power lost reset circuit.
- Each pixel of the three primary colors can achieve 256 brightness levels, or 16M colors full-color display, and scan frequency not less than 400Hz/s.
SKU: 44120RGB LED Strips and DriversOut of stock
1M WS2812B 5V Addressable RGB Non-Waterproof LED Strip Light 60LED’s/Mtr.
RGB LED Strips and Drivers1M WS2812B 5V Addressable RGB Non-Waterproof LED Strip Light 60LED’s/Mtr.
SKU: 56337- Installation surface must be smooth, clean and dry
- The part of LED components cannot be fixed on the surface of the sharp edges
- The strip should not be collided or crushed
- The strip can be cut following the cutting lines
- 24-bit color control (8-bit PWM per channel); 16.8 million colors per pixel
- The one-wire digital control interface
- Each RGB LED draws approximately 50Â mA at 5Â V with red, green, and blue at full brightness
SKU: 56337RGB LED Strips and Drivers16Bit WS2812B 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
RGB LED Strips and Drivers16Bit WS2812B 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
SKU: 43648- Outer Diameter: 68 mm.
- Supply Voltage: DC 4-7V.
- LED driver chip:Â WS2812B
- Communication interface: single wire communication.
- Send data at speeds of 800Kbps.
- The color of the light was highly consistent
- Full-color module, Full-color soft lights a lamp strip.
SKU: 43648RGB LED Strips and Drivers8 Bit WS2812 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
RGB LED Strips and Drivers8 Bit WS2812 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
SKU: 43798- Outer Diameter: 32 mm.
- Supply Voltage: DC 4-7V.
- LED Driver IC:Â WS2812
- Communication interface: single wire communication.
- Send data at speeds of 800Kbps.
- The color of the light was highly consistent
- Full-color module, Full-color soft lights a lamp strip.
SKU: 43798RGB LED Strips and DriversWS2812B RGB Addressable LED Module-10Pcs
SKU: 44424- Supply Voltage: 5V.
- Viewing angle: 120 degrees
- Red: (620-630nm) @ 550-700mcd
- Green: (515-530nm) @ 1100-1400mcd
- Blue: (465-475nm) @ 200-400mcd
- Built-in electric reset circuit and power lost reset circuit.
- Each pixel of the three primary colors can achieve 256 brightness levels, or 16M colors full-color display, and scan frequency not less than 400Hz/s.
SKU: 44424RGB LED Strips and Drivers24 Bit WS2812 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
RGB LED Strips and Drivers24 Bit WS2812 5050 RGB LED Built-in Full Color Driving Lights Circular Development Board
SKU: 43432- Outer Diameter: 86 mm.
- Supply Voltage: DC 4-7V.
- Communication interface: single wire communication.
- Send data at speeds of 800Kbps.
- The color of the light was highly consistent
- Full-color module, Full-color soft lights a lamp strip.
SKU: 43432RGB LED Strips and DriversWS2812B 5V Addressable RGB IP67 Waterproof LED Strip – 5m
SKU: 56272- 5m total length.
- 60 LEDs/m.
- 24-bit color control (8-bit PWM per channel).
- 16.8 million colors per pixel.
- The one-wire digital control interface.
- Each RGB LED draws approximately 50 mA at 5 V with red, green, and blue at full brightness.
- Waterproof.
SKU: 56272Wearable ElectronicWS2812 LilyPad RGB LED Module for Arduino
SKU: 52530LilyPad is a wearable e-textile technology. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They’re even washable!
SKU: 52530LED ModuleFull Color LED Module / RGB V2 light water for arduino
SKU: 43777- Good PRINT PACK design, very beautiful.
- 8 world of the three primary colors (red-green-blue) LED color, scanning control mode.
- Applicable for various platforms, such as 51 / AVR / AVR / ARM / for Arduino All kinds of platforms.
SKU: 43777Shield for ArduinoColorduino LED RGB Dot Matrix Driver Board with 5mm 8*8 RGB LED for Arduino
SKU: 330167- 8bits colors support with 6bits correction for each color in every dots
- Hardware 16MHz PWM support
- 24 constant current channels of 100mA each
- Current Consumption(Except LED matrix): 20mA typical (40mA maximum)
- Drive current(Every channel):Â 500mA
- Drive current(Every dot) :Â 58mA
SKU: 330167
Robu.in wants to send you updates. Click Allow to subscribe.
