IoT
Showing all 46 results
-
xBee Zigbee modules
Zigbee XBee Module S2C 802.15.4 2mW with Wire Antenna XB24CZ7WIT-004
SKU: 2829- Integrated, Wire Antenna
- Interoperable with other ZigBee-compliant devices
- Programmable versions with onboard microprocessor enable custom ZigBee application development
- Supports binding and multicasting for easy integration into a home automation platform
- Data Rate: RF 250 Kbps, Serial up to 1 Mbps
- Range: Indoor 200 ft (60 m), Outdoor (LOS) 4000 ft (1200 m)
- Transmit Power: 3.1 mW (+5 dBm)
- Channels: 16 channels
SKU: 2829Other ESP WIFI ModulesWeMos ESP8266 D1 R2 V2.1.0 WiFi Development Board
SKU: 299675- Microcontroller: ESP8266EX
- Operating Voltage: 3.3V
- Digital I/O Pins: 11 (all I/O pins have interrupt/PWM/I2C/one-wire capability, except for D0)
- Analog Input Pins: 1
- Flash Memory: 4MB
- On-Board Switching Power Supply:
- Input Voltage Range: 9V to 12V
- Output: 5V at 1A Max
SKU: 299675xBee Zigbee modulesZigbee XBee Pro S2C 802.15.4 Module 63mW 3Km+ 3.2dBi Antenna
SKU: 30511- Supports binding and multicasting for home automation
- Mesh-network topology
- 2.4 GHz for worldwide deployment
- Common XBee footprint fits Parallax XBee Adapters and the Propeller Activity Board
- Firmware upgrades via UART, SPI or over the air
- TRANSCEIVER CHIPSET: SiliconLabs EM357 SoC
- DATA RATE: 250kbps Max
- RATED OUTDOOR/RF LINE-OF-SIGHT RANGE: Up to 2 mile (3200m)
SKU: 30511Ai Thinker ESP Modules, LORA ModuleAi Thinker LoRa Series Ra-02 Spread Spectrum Wireless Module
SKU: 319670- Manufacturer: Ai-Thinker
- LoRa Spread Spectrum modulation technology
- Constant RF power output at + 20dBm-100mW voltage change
- High sensitivity: down to -148dBm
- Half-duplex SPI communication
- Programmable bit rates up to 300kbps
- Supports FSK, GFSK, MSK, GMSK, LoRa and OOK modulation modes
SKU: 319670xBee Zigbee modulesXBee Pro S2C 63mW 802.15.4 Module without Antenna
SKU: 527306- Supports binding and multicasting for home automation
- Mesh-network topology
- 2.4 GHz for worldwide deployment
- Common XBee footprint fits Parallax XBee Adapters and the Propeller Activity Board
- Firmware upgrades via UART, SPI or over the air
- TRANSCEIVER CHIPSET: SiliconLabs EM357 SoC
- DATA RATE: 250kbps Max
- RATED OUTDOOR/RF LINE-OF-SIGHT RANGE: Up to 2 mile (3200m)
SKU: 527306Shield for ArduinoEthernet W5100 Shield Network Expansion Board w/ Micro SD Card Slot for Arduino
SKU: 12205- Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet.
- Stackable Design, can directly be supported by for Arduino official Ethernet Library.
- Supports up to four simultaneous socket connections
- Can be used to store files for serving over the network.
- Can be accessed using the Mini SD TF library.
- IEEE802.3af compliant
- Low output ripple and noise (100mVpp)
- Overload and short-circuit protection
SKU: 12205Relay ModulesESP8266 10A DC 7-30V Network Relay WIFI Module
SKU: 314748- With ESP8266 Wifi module,4-layers board design.
- Input overvoltage protection, input with TVS, when the voltage exceeds 33V,
- automatic protection will operate.
- Input overcurrent protection.
- 220V 10A relay, one normally open, one normally closed.
- One way optocoupler isolation input, TVS input protection.
SKU: 314748IoT WIFI Smart SwitchesOut of stock
Sonoff Basic WI-FI Intelligent Timer Switch 10A 220W Digital Wireless Control Module
IoT WIFI Smart SwitchesSonoff Basic WI-FI Intelligent Timer Switch 10A 220W Digital Wireless Control Module
SKU: 51667- Support 433MHz RF remote.
- Support remotely turn on or off added devices.
- Support Max 8 timers tasks for each added device.
- Works with AMAZON ALEXA
- Works with GOOGLE ASSISTANT
- Also, Work with NEST
- Support numerous WiFi smart switches one smartphone.
SKU: 51667Relay ModulesESP8266 WiFi 5V 1 Channel Relay Module
SKU: 43225- Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time
- Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay
- Transmission Distance : 400m (max)
- Relay : 5V,10A/250V AC 10A/30V DC
- Baud Rate: 9600.
- Diode effusion protection;
- Short response time
SKU: 43225Arducam Cameras and AccessoriesOut of stock
Arducam Camera Ribbon Flex Extension Cable Set (7Pcs), 5.9″ 7.87″ 11.8″ 19.69″ 39.37″ for Raspberry Pi
Arducam Cameras and AccessoriesArducam Camera Ribbon Flex Extension Cable Set (7Pcs), 5.9″ 7.87″ 11.8″ 19.69″ 39.37″ for Raspberry Pi
SKU: 869381- High-Quality Cables
- 5 Lengths for Normal Raspberry Pi Models
- 2 Length for Raspberry Pi Zero
- Comes With Both 15 pin as well as 22 pin cable connectors
SKU: 869381IR and RF Transmitters and ReceiversOut of stock
HC-11 CC1101 433MHz Wireless Transceiver RF Serial UART Module
IR and RF Transmitters and ReceiversHC-11 CC1101 433MHz Wireless Transceiver RF Serial UART Module
SKU: 319335- 433MHz operation
- Ultra-low power consumption (3.5mA or 22mA depending on mode) with sleep option (80μA).
- 10dBm output power and high sensitivity providing long range in the open environment.
- 3V-6V operating voltage.
- Serial pass-through mode to replace the serial cable (half duplex).
- IO pass-through modes.
SKU: 319335Arducam Cameras and AccessoriesArducam IMX219 Wide Angle Camera Module for NVIDIA Jetson Nano, Raspberry Pi Compute Module CM3, CM3+ and CM4
Arducam Cameras and AccessoriesArducam IMX219 Wide Angle Camera Module for NVIDIA Jetson Nano, Raspberry Pi Compute Module CM3, CM3+ and CM4
SKU: 869383- Based on the Sony 8MP IMX219 Sensor
- Comes With 175° Wide Angle M12 Lens
- Frame Rate up to 120FPS @720P
- Integrated IR Filter
- Fixed Focus Type
SKU: 869383Arducam Cameras and AccessoriesOut of stock
Arducam HQ Camera for Jetson Nano and Xavier NX, 12MP 1/2.3 Inch IMX477 with 6mm CS-Mount Lens
Arducam Cameras and AccessoriesArducam HQ Camera for Jetson Nano and Xavier NX, 12MP 1/2.3 Inch IMX477 with 6mm CS-Mount Lens
SKU: 869382- Based on IMX477 Sensor
- Optical Format: 1/2.3″ (diagonal 7.857mm)
- Resolution: 4056(H) x 3040(V) 12MP
- Pixel Size: 1.55um x 1.55um
- Lens Field of View (FOV): 65° (H)
SKU: 869382xBee Zigbee modulesDigi XBee3 2.4GHz ZB3.0 PCB Antenna
SKU: 130679- Serial Data Interface: Uart, Spi, I2c.
- Configuration Method: API Or At Commands, Local Or Over-the-air.
- Frequency Band: ISM 2.4 GHz.
- Form Factor: Micro, Through-hole, Surface Mount.
- Interference: Immunity Dsss (Direct Sequence Spread Spectrum).
- Adc Inputs: (4) 10-bit Adc Inputs.
- Digital I/o: 15.
SKU: 130679Arducam Cameras and AccessoriesArducam 8MP IMX219 Motorized Focus Camera Module for NVIDIA Jetson Nano (NoIR)
Arducam Cameras and AccessoriesArducam 8MP IMX219 Motorized Focus Camera Module for NVIDIA Jetson Nano (NoIR)
SKU: 869376- Autofocus 8MP IMX219 Module (Visible light only)
- Mainly designed for the NVIDIA Jetson nano.
- Work with Raspberry Pi compute module but not other standard Raspberry Pi models.
SKU: 869376Arducam Cameras and AccessoriesArducam 5MP OV5647 NoIR MINI Camera with Flex Cable
SKU: 869369- Sensor: 1/4 inch OV5647 sensor in a fixed-focus lens
- Angle of view: 72.4° diagonal
- Integral IR filter, visible light
- Still picture resolution: 2592 x 1944, Max video resolution: 1080p
- Dimension: 60mm × 11.5mm × 5mm.
SKU: 869369xBee Zigbee modulesDigi XBee3 2.4GHz ZB3.0 RP-SMA Female Antenna
SKU: 130541- Serial Data Interface: Uart, Spi, I2c.
- Onboard Connector: RP-SMA Female.
- Configuration Method: API Or At Commands, Local Or Over-the-air
- Frequency Band: ISM 2.4 GHz
- Interference: Immunity Dsss (Direct Sequence Spread Spectrum)
- Adc Inputs: (4) 10-bit Adc Inputs
- Digital I/o: 15.
SKU: 130541Arducam Cameras and AccessoriesOut of stock
Arducam 2MP Stereo Camera for Raspberry Pi, Nvidia Jetson Nano/Xavier NX, with Dual OV2311 Monochrome Global Shutter
Arducam Cameras and AccessoriesArducam 2MP Stereo Camera for Raspberry Pi, Nvidia Jetson Nano/Xavier NX, with Dual OV2311 Monochrome Global Shutter
SKU: 869365- Based on Dual Monochrome global shutter OV2311 Sensor
- Pixel Size: 3 μm x 3 μm
- Active Array Size: 1600 x 1300
- Output Interface: 2-lane MIPI serial output
- Output Formats: 8-bit/10-bit RAW
SKU: 869365Other ESP WIFI ModulesESPresso Lite V2.0 ESP8266, Espressif, IoT, wifi
SKU: 11643-
Features Espressif System’s ESP8266 WROOM-02 Wi-Fi module (with 4Mb flash)
-
Design for IoT with free espert.io cloud and app service
-
Support the Arduino IDE (boards manager) and libraries
-
Auto program loading from Arduino IDE, using UC00A (or other compatible USB to Serial)
-
Onboard 3.3V Voltage Regulator with the maximum current of 800mA continuous, 1A peak
-
One Reset button, two User Programmable buttons
-
The WROOM-02 module is FCC, CE & TELEC certified
SKU: 11643xBee Zigbee modulesDigi XBee3 PRO 2.4GHz ZB3.0 RP-SMA Female Antenna
SKU: 130675- Serial Data Interface: Uart, Spi, I2c.
- Onboard Connector: RP-SMA Female.
- Frequency Band: ISM 2.4 GHz.
- Interference: Immunity Dsss (Direct Sequence Spread Spectrum).
- Adc Inputs: (4) 10-bit Adc Inputs
- Digital I/o: 15
SKU: 130675Arducam Cameras and AccessoriesArducam 5MP OV5647 NoIR Camera Module for Raspberry Pi 4/3B+/3
SKU: 869372- 1/4″ 5MP NoIR Camera Module OV5647 Sensor with flex cable for Raspberry Pi
- High-Definition video camera for Raspberry Pi Model A/B/B+, Raspberry Pi 2/3/3B+/4
- 5MP Omnivision OV5647 sensor in a fixed-focus lens
- No IR filter, sensitive to IR light
SKU: 869372Arducam Cameras and AccessoriesOut of stock
Arducam 5MP OV5647 NoIR Motorized IRcut filter M12 Mount LS-1820 Lens Camera for Raspberry Pi
Arducam Cameras and AccessoriesArducam 5MP OV5647 NoIR Motorized IRcut filter M12 Mount LS-1820 Lens Camera for Raspberry Pi
SKU: 869370- Comes With a Motorized IR Cut Filter and M12x0.5 Mount
- Compatible With Raspberry Pi 4/3B+/3
- Based on ov5647 5MP camera
- Automatic Switching Between Day and Night Mode
SKU: 869370Other ESP WIFI ModulesOut of stock
ESPresso Lite V2.0 IoT Starter Kit ESP8266, Espressif IoT WiFi
-26%
Other ESP WIFI ModulesESPresso Lite V2.0 IoT Starter Kit ESP8266, Espressif IoT WiFi
SKU: 16004-
Features Espressif System’s ESP8266 WROOM-02 Wi-Fi module (with 4Mb flash)
-
Design for IoT with free espert.io cloud and app service
-
Support the Arduino IDE (boards manager) and libraries
-
Auto program loading from Arduino IDE, using UC00A (or other compatible USB to Serial)
-
Onboard 3.3V Voltage Regulator with the maximum current of 800mA continuous, 1A peak
-
One Reset button, two User Programmable buttons
-
The WROOM-02 module is FCC, CE & TELEC certified
- Ready pads for I2C OLED panel
SKU: 16004Arducam Cameras and AccessoriesOut of stock
Arducam Camera Breakout Board 0.3MP(OV7725) w/ M12 lens (6mm lens)
Arducam Cameras and AccessoriesArducam Camera Breakout Board 0.3MP(OV7725) w/ M12 lens (6mm lens)
SKU: 869380- High Sensitivity Camera For Low-Light Operation
- Standard SCCB Interface
- Output support for Raw RGB, RGB (GRB 4:2:2, RGB565/555/444) and YCbCr (4:2:2) formats
- Supports image sizes: VGA, QVGA, and any size scaling down from CIF to 40×30
- Lens Shading Correction
- Saturation Level Auto Adjust (UV Adjust)
SKU: 869380IoT Development BoardsNANO32 ESP32 IoT Development Board
SKU: 24473-
ESP32 SoC (System on Chip) with WiFi and Bluetooth BLE
-
40MHz Crystal for CPU, 32.768KHz for RTC and low power operation
-
4MB Flash (32MBit)
-
FTDI231 for the USB to Serial communication
-
Auto-reset for automatic flash of new program
-
On board 3.3V, 0.5A LDO, tested to work upto 1A
-
2.5dBi Peak Gain, 0.5dBi averange gain antenna
SKU: 24473
Robu.in wants to send you updates. Click Allow to subscribe.
