Home Automation
Showing all 9 results
-
Other ESP WIFI Modules
Out of stock
ESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino
Other ESP WIFI ModulesESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino
SKU: 316037- WS2812 Led on board.
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated PLL, regulators, DCXO and power management units
SKU: 316037Relay ModulesESP8266 10A DC 7-30V Network Relay WIFI Module
SKU: 314748- With ESP8266 Wifi module,4-layers board design.
- Input overvoltage protection, input with TVS, when the voltage exceeds 33V,
- automatic protection will operate.
- Input overcurrent protection.
- 220V 10A relay, one normally open, one normally closed.
- One way optocoupler isolation input, TVS input protection.
SKU: 314748IoT WIFI Smart SwitchesOut of stock
Sonoff Basic WI-FI Intelligent Timer Switch 10A 220W Digital Wireless Control Module
IoT WIFI Smart SwitchesSonoff Basic WI-FI Intelligent Timer Switch 10A 220W Digital Wireless Control Module
SKU: 51667- Support 433MHz RF remote.
- Support remotely turn on or off added devices.
- Support Max 8 timers tasks for each added device.
- Works with AMAZON ALEXA
- Works with GOOGLE ASSISTANT
- Also, Work with NEST
- Support numerous WiFi smart switches one smartphone.
SKU: 51667Relay ModulesESP8266 WiFi 5V 1 Channel Relay Module
SKU: 43225- Onboard Module: ESP8266 wifi module; in AP mode it can connect with 5 Clients at the same time
- Operating Way: cellphone carried on wifi module; cellphone and wifi module carried on the same router, and use the APP to control relay
- Transmission Distance : 400m (max)
- Relay : 5V,10A/250V AC 10A/30V DC
- Baud Rate: 9600.
- Diode effusion protection;
- Short response time
SKU: 43225Other ESP WIFI ModulesESPresso Lite V2.0 ESP8266, Espressif, IoT, wifi
SKU: 11643-
Features Espressif System’s ESP8266 WROOM-02 Wi-Fi module (with 4Mb flash)
-
Design for IoT with free espert.io cloud and app service
-
Support the Arduino IDE (boards manager) and libraries
-
Auto program loading from Arduino IDE, using UC00A (or other compatible USB to Serial)
-
Onboard 3.3V Voltage Regulator with the maximum current of 800mA continuous, 1A peak
-
One Reset button, two User Programmable buttons
-
The WROOM-02 module is FCC, CE & TELEC certified
SKU: 11643Other ESP WIFI ModulesOut of stock
ESPresso Lite V2.0 IoT Starter Kit ESP8266, Espressif IoT WiFi
-26%
Other ESP WIFI ModulesESPresso Lite V2.0 IoT Starter Kit ESP8266, Espressif IoT WiFi
SKU: 16004-
Features Espressif System’s ESP8266 WROOM-02 Wi-Fi module (with 4Mb flash)
-
Design for IoT with free espert.io cloud and app service
-
Support the Arduino IDE (boards manager) and libraries
-
Auto program loading from Arduino IDE, using UC00A (or other compatible USB to Serial)
-
Onboard 3.3V Voltage Regulator with the maximum current of 800mA continuous, 1A peak
-
One Reset button, two User Programmable buttons
-
The WROOM-02 module is FCC, CE & TELEC certified
- Ready pads for I2C OLED panel
SKU: 16004IoT Development BoardsNANO32 ESP32 IoT Development Board
SKU: 24473-
ESP32 SoC (System on Chip) with WiFi and Bluetooth BLE
-
40MHz Crystal for CPU, 32.768KHz for RTC and low power operation
-
4MB Flash (32MBit)
-
FTDI231 for the USB to Serial communication
-
Auto-reset for automatic flash of new program
-
On board 3.3V, 0.5A LDO, tested to work upto 1A
-
2.5dBi Peak Gain, 0.5dBi averange gain antenna
SKU: 24473Other ESP WIFI ModulesOlimex ESP8266 EVB-BAT
SKU: 6330- Includes MOD-WIFI-ESP8266-DEV
- Relay 10A/250VAC (15A/120VAC 15A/24VDC) with connector and status LED
- Big button for easier access to UART mode
- LiPo battery connector with built-in LiPo charger and status LEDs
- Step up converter
- Power jack for +5V external power supply
- UEXT connector
- 20-pin connector CON1 with ESP8266’s signals
- PCB dimensions: (2.0 x 2.2)” ~ (51 x 57)mm
SKU: 6330Other ESP WIFI ModulesOlimex ESP8266-EVB
SKU: 11233- Includes MOD-WIFI-ESP8266-DEV
- Relay 220VAC/10A with connector and status LED
- Big button for easier access to UART mode
- Power jack for +5V external power supply
- UEXT connector
- The row of 16 pinholes at 0.1″ step with all ESP8266 signals accessible; male-male 16-pin connector included
- 4 mounting holes
SKU: 11233
Robu.in wants to send you updates. Click Allow to subscribe.
