Raspberry Pi Hats
Showing 97–144 of 165 results
-
-
Raspberry Pi Hats
Out of stock
Waveshare Power Over Ethernet HAT (G) For Raspberry Pi 5, 5V 5A Output, Supports 802.3af/at Network Standard, Raspberry Pi 5 PoE HAT
Raspberry Pi HatsWaveshare Power Over Ethernet HAT (G) For Raspberry Pi 5, 5V 5A Output, Supports 802.3af/at Network Standard, Raspberry Pi 5 PoE HAT
SKU: R148332- BRAND: Waveshare
- POE POWER INPUT 38V ~ 57V DC in
- POWER OUTPUT GPIO header: 5V 5A (MAX)
- DIMENSIONS 56.5 × 64.98mm
- NETWORK STANDARD IEEE 802.3af/at PoE
SKU: R148332 -
-
IoT and Wireless on Sale, Raspberry Pi Hats
Raspberry Pi X400 Multifunctional Expansion Board
SKU: 815866- Built in High quality Class-D stereo audio amplifier (TI TPA3118D2)
- AMP can be enabled / disabled via jumper
- 3.5mm stereo audio jack
- Built in High quality audio headphone amplifier (TI TPA6133A)
SKU: 815866 -
Raspberry Pi Hats
Out of stock
Waveshare UPS HAT (E) for Raspberry Pi, Supports 4× 21700 Li batteries (NOT included), Bi-Directional Fast charging, 5V 6A Output, Pogo Pins Connector, Raspberry Pi UPS
Raspberry Pi HatsWaveshare UPS HAT (E) for Raspberry Pi, Supports 4× 21700 Li batteries (NOT included), Bi-Directional Fast charging, 5V 6A Output, Pogo Pins Connector, Raspberry Pi UPS
SKU: R163736- Control Bus: I2C
- Battery Support: 4× 21700 Li batteries (not included)
- Type-C Power: Bi-directional input/output, up to 40W
- Output Power: 5V, 6A
- Mounting Hole Size: 3.0 mm
SKU: R163736 -
-
-
Raspberry Pi Hats
Out of stock
Waveshare Cat-1/GSM/GPRS/GNSS HAT for Raspberry Pi, Based On A7670E module, LTE
Raspberry Pi HatsWaveshare Cat-1/GSM/GPRS/GNSS HAT for Raspberry Pi, Based On A7670E module, LTE
SKU: R101195- LTE Cat-1: LTE-FDD: B1, B3, B5, B7, B8, B20
- 2G :GSM/GPRS/EDGE: 900/1800 MHz
- GNSS :GPS, BeiDou, GLONASS
- Power supply: 5V (via USB port or 5V pin header), 3.7 ~ 4.2V (via VBAT pin-header, supports 3.7V Li-ion battery power input)
- 4.2V (via VBAT pin-header, supports 3.7V Li-ion battery power input)
- Operating voltage: 3.3V.
SKU: R101195 -
Raspberry Pi Hats
Waveshare EM06-E LTE Cat-6 HAT for Raspberry Pi, Dual Antennas LTE-A, Multi Regions Multi Band, GNSS
Raspberry Pi HatsWaveshare EM06-E LTE Cat-6 HAT for Raspberry Pi, Dual Antennas LTE-A, Multi Regions Multi Band, GNSS
SKU: 1254987- Region / Provider EMEA / APAC (except Japan and CMCC) / Brazil
- Module dimensions 42.0 × 30.0 × 2.3 (mm)
- Operating temperature -30°C ~ +70°C
- LTE-FDD B1, B3, B5, B7, B8, B20, B28, B32 (receive only for B32)
- LTE-TDD B38, B40, B41
- B20+B32 (B32 is used for aux component carrier only), B38+B38, B40+B40, B41+B41
SKU: 1254987 -
-
Raspberry Pi Hats
Waveshare Serial Bus Servo Driver HAT, Integrates ESP32 and Servo Control Circuit, Suitable for ST / RSBL Series Serial Bus Servos
Raspberry Pi HatsWaveshare Serial Bus Servo Driver HAT, Integrates ESP32 and Servo Control Circuit, Suitable for ST / RSBL Series Serial Bus Servos
SKU: R136625- Controller: ESP32-WROOM-32
- Power Supply Port: XT60 connector, 5.5×2.5 mm DC jack
- Power Supply: 9~25V (the input voltage and the servo voltage must be matched)
- Communication Interface: UART, USB Type-C port × 2
- Wireless Communication: 2.4G WiFi
- Mounting Hole Diameter: 3 mm
- Mounting Hole Spacing: 58×49 mm
- PCB Size: 65×57 mm
SKU: R136625 -
Raspberry Pi Hats
Out of stock
Waveshare Sense HAT (C) for Raspberry Pi, Onboard Multi Powerful Sensors, Supports External Sensors
Raspberry Pi HatsWaveshare Sense HAT (C) for Raspberry Pi, Onboard Multi Powerful Sensors, Supports External Sensors
SKU: 1412534- Product: Waveshare Sense HAT (C) for Raspberry Pi, Onboard Multi Powerful Sensors
- Magnetometer Features: Resolution: 16-bit
- Operating Voltage (VDC): 3.3
- Accelerometer Features: Resolution: 16-bit
- Gyrometer Features: Resolution: 16-bit
SKU: 1412534 -
-
Raspberry Pi Hats
Out of stock
Waveshare PoE UPS Base Board Designed for Raspberry Pi Compute Module 4, Gigabit Ethernet, Dual HDMI, Quad USB2.0
Raspberry Pi HatsWaveshare PoE UPS Base Board Designed for Raspberry Pi Compute Module 4, Gigabit Ethernet, Dual HDMI, Quad USB2.0
SKU: 1300107- POWER INPUT: 7-36V
- STORAGE: MicroSD card socket for Compute Module 4 Lite (without eMMC) variants
- FAN: allows speed adjustment and measurement, 5V / 12V
- INDICATOR: M.2 status LED
- CM4: status LED
SKU: 1300107 -
Raspberry Pi Hats
Out of stock
Waveshare RM500U-CN 5G HAT for Raspberry Pi Quad Antennas LTE-A Multi Band 5G/4G/3G
Raspberry Pi HatsWaveshare RM500U-CN 5G HAT for Raspberry Pi Quad Antennas LTE-A Multi Band 5G/4G/3G
SKU: 1254992- 5G NR 3GPP Release 15 NSA/SA operation, Sub-6 GHz
- 5G NR NSA n41, n78, n79
- LTE Category downlink Cat 12, uplink Cat 13
- Operating temperature -30 °C ~ +75 °C
- Supporting RM500U-CN core module, supporting 5G and LTE-A multiple network standards, supporting 5G NSA and SA networking, supporting four major domestic operators
SKU: 1254992 -
Raspberry Pi Hats
Waveshare Pico-RTC-DS3231 IC Test Board
SKU: 979552- Operating voltage: 3.3V
- Backup battery voltage: 2.3V~5.5V
- Operating temperature: -40°C ~ 86°C
- Real-Time Clock Counts Seconds, Minutes, Hours, Date of the Month, Month, Day of the Week, and Year with Leap-Year
- Optional format: 24-hour OR 12-hour with an AM/PM indicator
- 2x programable alarm clock
SKU: 979552 -
Raspberry Pi Hats
Waveshare Pioneer600 Raspberry Pi Expansion Board
SKU: 968484- Onboard CP2102:Â USB TO UART converter
- 0.96-Inch OLED Display
- PCF8591 :Â 8-bit AD/DA converter, I2C interface
- BMP180:Â pressure sensor, I2C interface
- PCF8574:Â I/O expansion chip, I2C interface
- DS3231:Â high precision RTC chip, I2C interface
- LFN0038K IR receiver
SKU: 968484 -
Raspberry Pi Hats
Geekworm X1301 HDMI to CSI-2 Shield for Raspberry Pi 5/4B/3B+/3B Support 1080P@60fps
Raspberry Pi HatsGeekworm X1301 HDMI to CSI-2 Shield for Raspberry Pi 5/4B/3B+/3B Support 1080P@60fps
SKU: R158355- HDMI Pass-Through: Outputs HDMI in standby.
- Supports 2K Full HD (1920×1080, 60fps).
- Compatible: Raspberry Pi 5, 4B, 3B+, 3B.
- MIPI CSI-2: Four data lanes.
- Audio: HDMI audio via I²S.
- Stackable Design.
SKU: R158355 -
-
-
Raspberry Pi Hats
PIMORONI Rainbow HAT for Raspberry Pi
SKU: 845803- Compatible with all 40-pin header Raspberry Pi models
- Breakout pins for servo, I2C, SPI, and UART (all 3v3)
- BMP280 temperature and pressure sensor
- Seven APA102 multicolor LEDs
- Four 14-segment alphanumeric displays (green LEDs)
SKU: 845803 -
Raspberry Pi Hats
Geekworm X872 V2.0 M.2NVME SSD Storage Expansion Board for Raspberry Pi 4
SKU: R158350- Model: X872 V2.0
- Compatibility: Raspberry Pi 4 Model B
- SSD Support: Up to 4TB, M.2 NVMe sizes (2280, 2260, 2242, 2230)
- Data Transfer: USB 3.1 Gen1, up to 5Gbps
- Boot Capability: Supports booting OS from SSD
SKU: R158350 -
Raspberry Pi Hats
Geekworm Raspberry Pi 5 PoE Hat support 802.3af/at [Pi5-POE-PD-A]
SKU: R158348- Standards: IEEE 802.3af/at
- Input Voltage: 37V ~ 57V
- Output Voltage: 5V
- Output Current: 4.5A (MAX)
- Power Delivery Protocol: PD active protocol (prevents 5A startup warning)
- Connector Type: USB-C
SKU: R158348 -
Raspberry Pi Hats
Out of stock
52Pi N21 Dual 2280 NVMe base for Raspberry Pi 5，Supprt two 2230/2242/2260/2280 NVMe SSDs
Raspberry Pi Hats52Pi N21 Dual 2280 NVMe base for Raspberry Pi 5，Supprt two 2230/2242/2260/2280 NVMe SSDs
SKU: R155309- ASM1182e Chipset: Efficient data handling.
- Power Management: HAT+ STANDBY mode.
- LED Indicators: Drive status display.
- Stable Power Supply: Custom gold-plated pins.
- Cooling Compatibility: Works with official Pi cooler.
- Easy Installation: Includes all mounting hardware.
SKU: R155309 -
Raspberry Pi Hats
Out of stock
Waveshare A7600C1 LTE Cat-1 HAT for Raspberry Pi, Low Speed 4G Module, 2G GSM / GPRS
Raspberry Pi HatsWaveshare A7600C1 LTE Cat-1 HAT for Raspberry Pi, Low Speed 4G Module, 2G GSM / GPRS
SKU: R101196- LTE Cat-1 HAT for Raspberry Pi enabling 4G and 2G communication.
- Supports TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL protocols.
- Features dial-up, telephone call, SMS capabilities for versatile communication.
- LTE-FDD: B1/B3/B5/B8
- LTE-TDD: B34/B38/B39/B40/B41
- 2G:GSM/GPRS/EDGE: 900/1800 MHz
- SMS:Supported types: MT, MO, CB, Text, PDU
SKU: R101196 -
-
Raspberry Pi Hats
Out of stock
Waveshare RP2350-One, Onboard PCB Type-A Plug, MCU Board Based On Raspberry Pi RP2350A Dual-core Dual-architecture Microcontroller
Raspberry Pi HatsWaveshare RP2350-One, Onboard PCB Type-A Plug, MCU Board Based On Raspberry Pi RP2350A Dual-core Dual-architecture Microcontroller
SKU: R193684- Dual-core: Cortex-M33 & RISC-V.
- Memory: 4MB Flash, 520KB SRAM.
- USB & GPIO: 29 pins, USB 1.1.
- Comms: SPI, I2C, UART.
- Analog/PWM: ADC, PWM.
SKU: R193684 -
Raspberry Pi Hats
Out of stock
Waveshare PCIe To M.2 Adapter With PoE Function (B) For Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, Raspberry Pi 5 PoE HAT
Raspberry Pi HatsWaveshare PCIe To M.2 Adapter With PoE Function (B) For Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, Raspberry Pi 5 PoE HAT
SKU: R191358- NVMe SSD support for high-speed data.
- PoE functionality (IEEE 802.3af/at).
- Power input: 37V ~ 57V DC.
- Power output: 5V 4.5A (GPIO) and 12V 2A.
- Designed for Raspberry Pi 5.
SKU: R191358 -
HMI LCD Display, LORA Module, Raspberry Pi Hats
Out of stock
Elecrow LR1302 LoRaWAN Gateway Module SPI US915 SX1302 Long Range Gateway Module
HMI LCD Display, LORA Module, Raspberry Pi HatsElecrow LR1302 LoRaWAN Gateway Module SPI US915 SX1302 Long Range Gateway Module
SKU: R190580- Dual-core RP2040 with LR1262 module (868/915MHz).
- Compatible with Crowtail and other modules.
- Includes buzzer, LED, button, and 1.8″ LCD.
- Works with Arduino and MicroPython.
SKU: R190580 -
-
Raspberry Pi Hats
Waveshare PCIe to MiniPCIe / Gigabit Ethernet / USB 3.2 Gen1 HAT for Raspberry Pi 5, Supports MiniPCIe interface 4G Module, High-speed Networking, Raspberry Pi 5 HAT
Raspberry Pi HatsWaveshare PCIe to MiniPCIe / Gigabit Ethernet / USB 3.2 Gen1 HAT for Raspberry Pi 5, Supports MiniPCIe interface 4G Module, High-speed Networking, Raspberry Pi 5 HAT
SKU: R158040- Operating system: Windows / Linux / Android
- Antenna interface: IPEX-1 connector (LTE main antenna + LTE diversity antenna + GNSS antenna)
- Power supply: 3V to 3.6V
- Operating temperature: -40℃ ~ +80℃
- Form factor: Mini-PCIe
SKU: R158040 -
Raspberry Pi Hats
Waveshare PCIe To Gigabit Ethernet And USB 3.2 Gen1 HAT For Raspberry Pi 5, 3x USB 3.2 Gen1, 1x Gigabit Ethernet, Driver-Free, Plug And Play, Raspberry Pi 5 PCIe HAT
Raspberry Pi HatsWaveshare PCIe To Gigabit Ethernet And USB 3.2 Gen1 HAT For Raspberry Pi 5, 3x USB 3.2 Gen1, 1x Gigabit Ethernet, Driver-Free, Plug And Play, Raspberry Pi 5 PCIe HAT
SKU: R136624- PCIe Mode: PCI-E×1 Gen2
- Compatibility: Raspberry Pi 5B
- USB Ports: 3 x USB 3.2 Gen1
- Ethernet Port: Gigabit
- Power Control: USB interface
- Standard: HAT+
SKU: R136624 -
Raspberry Pi Hats
Waveshare Cat-1/GNSS HAT for Raspberry Pi, Based On SIM7670G module, Global Multi-band LTE 4G Cat-1 support, GNSS positioning, 3x USB 2.0 extended ports
Raspberry Pi HatsWaveshare Cat-1/GNSS HAT for Raspberry Pi, Based On SIM7670G module, Global Multi-band LTE 4G Cat-1 support, GNSS positioning, 3x USB 2.0 extended ports
SKU: R112129- Product:Â Cat-1/GNSS HAT
- Power supply: 5V
- Logic level: 3.3V
- Data transmission: ≤5Mbps (UL) / ≤10Mbps (DL)
- GNSS: GPS, GLONASS, Galileo, BeiDou
SKU: R112129 -
IoT and Wireless on Sale, Raspberry Pi Hats
Compute Module IO Board Plus, for Raspberry Pi CM4S / CM3 / CM3L / CM3+ / CM3+L
-7%
IoT and Wireless on Sale, Raspberry Pi HatsCompute Module IO Board Plus, for Raspberry Pi CM4S / CM3 / CM3L / CM3+ / CM3+L
SKU: 1473848- Compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation.
- Raspberry Pi GPIO header, for connecting sorts of Raspberry Pi HATs.
- Arduino connectivity also supports Arduino shields.
- 1-WIRE interface, for connecting single-bus devices like DS18B20.
- 4 x keys, 4 x LEDs, and 1 x Buzzer, for I/O testing.
SKU: 1473848
![Geekworm Raspberry Pi 5 PoE Hat support 802.3af/at [Pi5-POE-PD-A]](https://st.robu.in/wp-content/uploads/2024/08/147-314x252.jpg)
