Motor Drivers
Showing 193–216 of 216 results
-
Pololu Motor Drivers
Pololu MP6500 Stepper Motor Driver Carrier, Potentiometer Current Control
SKU: 1607675- Built-in regulator (no external logic voltage supply needed)
- Can interface directly with 3.3Â V and 5Â V systems
- Over-temperature thermal shutdown, over-current shutdown, short circuit protection, and under-voltage lockout
- 4-layer, 2Â oz copper PCB for improved heat dissipation
SKU: 1607675 -
Pololu Motor Drivers
Pololu BD65496MUV Single Brushed DC Motor Driver Carrier
SKU: 1607669- Under-voltage lockout on the logic supply and protection against over-temperature
- Carrier board adds reverse-voltage protection on the motor supply
- Compact size (0.6″×0.6″)
- Built-in under-voltage and over-temperature protection
SKU: 1607669 -
Stepper Motor Drivers
Rtelligent T86S closed loop stepper driver
SKU: R182415- Matching Motor: Closed-loop motors below 86mm
- Brake Interface: Direct brake wire connection
- Debugging Interface: Extended DIP
- Pulse Command Voltage: 28~110DC
- Pulse Width Setting: DIP configurable
- Direction Inversion: Software setting
SKU: R182415 -
-
-
Brushed / Brushless DC motor Driver
VNH5019 Motor Driver Carrier
SKU: R175417- Voltage Range: 5.5 to 24 V
- Current Rating: 12 A continuous, 30 A peak
- Protections: Over-voltage, under-voltage, over-temperature, and over-current
- LED Indicators: Motor status display
- Compact Design: Fully assembled for easy use
SKU: R175417 -
Brushed / Brushless DC motor Driver
TB9051FTG Single Brushed DC Motor Driver Carrier
SKU: R175419- Voltage Range: 4.5 V to 28V.
- Current: Up to 2.6 A continuous, 5 A peak.
- Compact Size: Fits in tight spaces.
- PWM Control: Enables precise motor speed and direction.
- Easy Setup: Pre-soldered components for quick connections.
- Error Output: Alerts for operational issues.
SKU: R175419 -
Pololu Motor Drivers
Motoron M3H550 Triple Motor Controller for Raspberry Pi (Connectors Soldered)
SKU: R175411- Controls up to three brushed DC motors.
- Compatible with Raspberry Pi (Model B+ and newer).
- I²C interface requires only two GPIO pins.
- Motor supply voltage: 1.8 V to 22 V.
- Continuous output current: up to 1.7 A per motor.
- Stackable design for expanded motor control.
SKU: R175411 -
Pololu Motor Drivers
Motoron M3H256 Triple Motor Controller for Raspberry Pi (Connectors Soldered)
SKU: R175413- Controls 3 DC Motors: Bidirectional.
- Voltage Range: 4.5 V to 48 V.
- Current: 2 A continuous, 6.4 A peak.
- Stackable: Multiple units on one Raspberry Pi.
- I²C Interface: Uses 2 GPIO pins.
- Configurable Settings: Adjustable acceleration and speed.
SKU: R175413 -
Pololu Motor Drivers
Motoron M2T550 Dual I²C Motor Controller (Header Pins Soldered)
SKU: R175408- Controls Two Motors: Operates two DC motors independently via I²C.
- Voltage Range: Supports 1.8 V to 22 V.
- Current: Up to 1.6 A continuous per motor.
- Compact Design: Small size (0.6″ × 0.8″).
- Configurable Parameters: Adjustable settings for motion control.
SKU: R175408 -
Brushed / Brushless DC motor Driver
Motoron M1T550 Single I²C Motor Controller (Header Pins Soldered)
Brushed / Brushless DC motor DriverMotoron M1T550 Single I²C Motor Controller (Header Pins Soldered)
SKU: R175406- I²C Interface: Connects multiple controllers easily.
- Voltage Range: Supports 1.8 V to 22 V.
- Current Capacity: 1.8 A continuous, 5 A peak.
- Single Connection: Simplifies setup with no PWM needed.
- Configurable Motion: Customizable speed and acceleration.
- Error Management: Built-in features for troubleshooting.
SKU: R175406 -
Stepper Motor Drivers
A5984 Stepper Motor Driver Carrier, Adjustable Current, Blue Edition
SKU: R175414- Voltage Range: 8 V to 40 V.
- Current: 1.2 A continuous, 2 A peak.
- Microstepping: 8 resolutions down to 1/32-step.
- Adjustable Limit: Set with onboard potentiometer.
- Protection: Over-current and over-temperature.
- PCB: 4-layer for better cooling.
SKU: R175414 -
-
-
-
Pololu Motor Drivers
Pololu TB67S249FTG Stepper Motor Driver Compact Carrier
SKU: 1607681- Built-in regulator (no external logic voltage supply needed)
- Can interface directly with 3.3 V and 5 V systems
- Under-voltage lockout and protection against over-current/short-circuit and over-temperature
- Open-load detection
- Active-low error outputs indicate over-current, over-temperature, or open-load condition
- Compact size (0.6″ × 0.8″)
- 4-layer, 2 oz copper PCB for improved heat dissipation
SKU: 1607681
