Seeed Studio
Showing 145–192 of 284 results
-
-
-
TFT LCD Displays
Out of stock
reTerminal – Embedded Linux with Raspberry Pi CM4 and 5-Inch Capacitive Multi-Touch Screen
TFT LCD DisplaysreTerminal – Embedded Linux with Raspberry Pi CM4 and 5-Inch Capacitive Multi-Touch Screen
SKU: 962315- 5-Inch IPS capacitive multi-touch screen.
- Cryptographic co-processor with secure hardware-based key storage.
- High-speed expansion interface with a PCIe 1-lane Host, Gen 2 (5Gbps), USB 2.0 port, 28 GPIOs, and PoE.
- Supports video output at 5K resolution
SKU: 962315 -
Bluetooth, WIFI and Trans-receiver ICs
Seeed Studio Wio-WM1110 Dev Kit, built-in Semtech LR1110 and Nordic nRF52840
Bluetooth, WIFI and Trans-receiver ICsSeeed Studio Wio-WM1110 Dev Kit, built-in Semtech LR1110 and Nordic nRF52840
SKU: 1670444- LoRa®WAN Protocol: V1.0.4
- Frequency: 863~928MHz
- Sensitivity: -125dBm @125K/SF7 ,-141dBm @125K/SF12
- Output Power: 20dBm max @LoRa®
- Positioning Technology: GNSS(GPS,BeiDou),WiFi
SKU: 1670444 -
-
PIR / IR and Optical Sensor
MR60FDA1 60GHz mmWave Sensor – Fall Detection Pro Modul
SKU: 1488397- The radius of movement of people detection [1] is 6 meter
- Frequency 60 GHz
- Fall monitoring radius [2]Â 2.5 meter
- Radar detection angle (horizontal) 100 degrees
- Radar detection angle (pitch) 100 degree
SKU: 1488397 -
IoT and Wireless on Sale, Seeed Studio SBC
Out of stock
reComputer Jetson-20-1-H1 with Jetson Xavier NX module, Aluminium Case, Pre-Installed JetPack System (Without Adapter)
-9%
IoT and Wireless on Sale, Seeed Studio SBCreComputer Jetson-20-1-H1 with Jetson Xavier NX module, Aluminium Case, Pre-Installed JetPack System (Without Adapter)
SKU: 1252361- 6-core NVIDIA Carmel ARM®v8.2 64-bit CPU 6MB L2 + 4MB L3
- 384-core NVIDIA Volta™ GPU with 48 Tensor Cores
- port, 4 USB 3.0Â Type-A ports, HDMI port and DP ports
- DC Jack 19V 90W 4.74A MAX
- 1 x RJ45 Gigabit Ethernet Connector (10/100/1000)
- 8 GB 128-bit LPDDR4x @ 51.2GB/s
SKU: 1252361 -
ARM Microcontroller
ODYSSEY- STM32MP135D with eMMC, Cortex-A7 STM32, Yocto/Buildroot OS, Ethernet ports with WoL, USB Type-A, CSI, LCD, 4Gb DRAM, TF card holder, PoE
ARM MicrocontrollerODYSSEY- STM32MP135D with eMMC, Cortex-A7 STM32, Yocto/Buildroot OS, Ethernet ports with WoL, USB Type-A, CSI, LCD, 4Gb DRAM, TF card holder, PoE
SKU: 1682403- Processor: 32-bit Arm Cortex-A7 STM32 MPU
- Operating System: Yocto, Buildroot
- Connectivity: 2x 10/100M Ethernet ports, ETH0 supports WoL function,
-
- 1x USB Type-A,
- 1x CSI 30p FPC Connector,
- 1x LCD 40p FPC Connector,
- 40-pin RPI-compatible GPIO
- Storage: Kingston: 4Gb DRAM, additional TF card holder for up to 32GB, 4GB eMMC
-
- Power Supply: PoE through Ethernet, power supply through Type-C
SKU: 1682403 -
-
-
IoT and Wireless on Sale, Seeed Studio SBC
SeeedStudio BeagleBone Green IoT Development Board – USB-Compatible (WiFi Adapter Required)
-6%
IoT and Wireless on Sale, Seeed Studio SBCSeeedStudio BeagleBone Green IoT Development Board – USB-Compatible (WiFi Adapter Required)
SKU: 672597- AM335x 1GHz ARMR Cortex-A8 Processor
- 512MB DDR3 RAM
- 4GB 8-bit eMMC onboard flash storage
- 3D graphics accelerator
- NEON floating-point accelerator
- 2x PRU 32-bit microcontrollers
- USB client for power & communications
- USB host
- Â Ethernet
SKU: 672597 -
Gas and Dust Sensor
Seeed Studio Grove -Smart Air Quality Sensor-SGP41,MOX gas sensor for VOCs & NOx, Air Purifier, Smart Ventilation
Gas and Dust SensorSeeed Studio Grove -Smart Air Quality Sensor-SGP41,MOX gas sensor for VOCs & NOx, Air Purifier, Smart Ventilation
SKU: 1670432- Long-term Stability: It boasts exceptional long-term stability and durability, making it suitable for continuous monitoring of indoor air quality over extended periods.
- Compact and Flexible:Â It has a 4-pin Grove interface for easy microcontroller connection and supports both 3.3V and 5V power supply, making it versatile for various applications.
- Reliable and Reproducible:Â Sensirion’s state-of-the-art production process guarantees high reproducibility and reliability of the SGP41 module
SKU: 1670432 -
Segment Displays
SeeedStudio Grove 0.54″ Red Dual Alphanumeric Display
SKU: 1135204- Supply voltage: 3.3V / 5V
- Operating ambient temperature: -30°C to 85°C
- LED DisplayJM-S05422AH-001
- LED Controller Driver: HT16K33
- LED Color: Red
- Ultra-high brightness: 30mcd
- LED height: 0.54inch
- LED segment: 14
- Size: 40 * 40mm
- Output interface: I2C
- I2C Address(Selectable) 0x70(Default)
SKU: 1135204 -
-
ARM Microcontroller
Out of stock
ODYSSEY – STM32MP135D, Cortex-A7 STM32, Yocto/Buildroot OS, Ethernet ports with WoL, USB Type-A, CSI, LCD, 4Gb DRAM, TF card holder, PoE
ARM MicrocontrollerODYSSEY – STM32MP135D, Cortex-A7 STM32, Yocto/Buildroot OS, Ethernet ports with WoL, USB Type-A, CSI, LCD, 4Gb DRAM, TF card holder, PoE
SKU: 1682405- Processor: 32-bit Arm Cortex-A7 STM32 MPU
- Operating System: Yocto, Buildroot
- Connectivity: 2x 10/100M Ethernet ports, ETH0 supports WoL function,
- 1x USB Type-A,
- 1x CSI 30p FPC Connector,
- 1x LCD 40p FPC Connector,
- 40-pin RPI-compatible GPIOStorage: Kingston: 4Gb DRAM, additional TF card holder for up to 32GB,
SKU: 1682405 -
-
Audio Amplifier Module
Seeedstudio ReSpeaker Lite – USB 2-Mic Array with Onboard AI Audio Processing Algorithms, compatible with Seeed Studio XIAO ESP32S3 (Sense), Raspberry Pi, Adafruit QT Py
Audio Amplifier ModuleSeeedstudio ReSpeaker Lite – USB 2-Mic Array with Onboard AI Audio Processing Algorithms, compatible with Seeed Studio XIAO ESP32S3 (Sense), Raspberry Pi, Adafruit QT Py
SKU: R155563- Core Chip: XMOS XU316
- Digital Microphones: High-performance digital microphones * 2
- Sensitivity: -26 dBFS
- Acoustic Overload Point: 120 dBL
- SNR: 64 dBA
- Power Supply: USB 5V, external 5V
SKU: R155563 -
Seeed Studio SBC
Out of stock
reComputer Jetson-20-1-H2 with Jetson Xavier NX module, Aluminium Case, Pre-Installed JetPack System (Without Adapter)
Seeed Studio SBCreComputer Jetson-20-1-H2 with Jetson Xavier NX module, Aluminium Case, Pre-Installed JetPack System (Without Adapter)
SKU: 1252362- 6-core NVIDIA Carmel ARM®v8.2 64-bit CPU 6MB L2 + 4MB L3
- 384-core NVIDIA Volta™ GPU with 48 Tensor Cores
- port, 4 USB 3.0Â Type-A ports, HDMI port and DP ports
- DC Jack 19V 90W 4.74A MAX
- 1 x RJ45 Gigabit Ethernet Connector (10/100/1000)
- 16 GB 128-bit LPDDR4x @ 59.7GB/s
SKU: 1252362 -
OLED Display
SeeedStudio Grove OLED Display 0.96”
SKU: 1135214- Power Voltage (VCC): 3.3~5.5 V
- Driver IC: SSD1308Z
- Display Color: White
- Dot Matrix: 128×64
- Panel Size: 26.7(W)×19.26(H)mm
- Active Area: 21.74(W)×11.175 (H)mm
- Dot Pitch: 0.17(W)×0.175 (H)mm
- Dot Size: 0.15(W)×0.15 (H)mm
- Wide range of operating temperature:20~70℃
SKU: 1135214 -
-
-
-
-
PIR / IR and Optical Sensor
Seeed Studio Grove Smart IR Gesture Sensor, infrared camera sensor, AI algorithm, over 15 gestures detection, I2C, SPI, support Grove, XIAO, Type-C connecting, 3.3V/5V
PIR / IR and Optical SensorSeeed Studio Grove Smart IR Gesture Sensor, infrared camera sensor, AI algorithm, over 15 gestures detection, I2C, SPI, support Grove, XIAO, Type-C connecting, 3.3V/5V
SKU: 1770546- Infrared camera sensor: PAG7646J1
- Onboard LED fill light: AU3838A-ZRR-1000mA
- Power supply: 3.3v/5v
- Detection range: 5 to 40cm
SKU: 1770546 -
Temperature & Humidity Sensor
Out of stock
SenseCAP Indicator D1Pro, 4-Inch Touch Screen IoT development platform powered by ESP32S3 & RP2040
Temperature & Humidity SensorSenseCAP Indicator D1Pro, 4-Inch Touch Screen IoT development platform powered by ESP32S3 & RP2040
SKU: 1670441- Screen:Â 3.95 Inch, Capacitive RGB Touch Screen
- Screen Resolution:Â 480 x 480 pixels
- Power Supply:Â 5V DC, 1A
- Processor: ESP32-S3: Xtensa® dual-core 32-bit LX7, up to 240MHz / RP2040: Dual ARM Cortex-M0+ up to 133MHz
SKU: 1670441 -
Seeed Studio SBC
Out of stock
reComputer J101 Dev Kit Carrier Board for Jetson Nano, With micro SD card slot
Seeed Studio SBCreComputer J101 Dev Kit Carrier Board for Jetson Nano, With micro SD card slot
SKU: 1358404- Model: reComputer J101
- Module Compatibility: Jetson Nano series
- Power supply: 3.3V
- Micro SD card: 1 x Micro SD card slot (48MHz CLK Frequency)
- PCB Size / Overall Size: 100mm x 80mm
SKU: 1358404 -
Audio Amplifier Module
SeeedStudio Grove Recorder v3.0
SKU: 1135217- Working Voltage: 3.â…—V
- Working Current (@5V, 25℃)
- Standby: 25-30mA
- Recording: 29-35mA
- Playing: 110-150mA
- Working Current (@3.3V, 25℃)
- Standby: 23-25mA
- Recording: 25-30mA
- Playing: 70-150mA
- Working Temperature: 0~85℃
- Size: 40x20mm
- Weight: 31.5g
SKU: 1135217 -
Bluetooth, WIFI and Trans-receiver ICs
Seeedstudio Wio Tracker 1110 Dev Board- the Tracker Prototype for Indoor and Outdoor Positioning
Bluetooth, WIFI and Trans-receiver ICsSeeedstudio Wio Tracker 1110 Dev Board- the Tracker Prototype for Indoor and Outdoor Positioning
SKU: 1881896- Model: Seeedstudio Wio Tracker 1110 Dev Board- the Tracker Prototype for Indoor and Outdoor Positioning
- Powered by the Nordic nRF52840 and Semtech LR1110.
- Multi-protocols.
- Onboard temperature sensor.
- Humidity sensor.
- 3-axis accelerometer.
SKU: 1881896 -
e-Ink Paper Display
1.02″ Flexible Monochrome ePaper Display with 128×80 Pixels
SKU: 1840847- Model: 1.02″ Flexible Monochrome ePaper Display with 128×80 Pixels.
- Exceptional Readability
- Ultra-Low Power Usage
- Flexibility and Portability
- Applications: Reading equipment, Mobile device, Electronic tags and price tags, Smart Wearables
SKU: 1840847 -
-
Seeed Studio SBC
A203 (Version 2) Carrier Board for Jetson Nano/Xavier NX/TX2 NX with compact size and rich ports (Wi-fi, Bluetooth, SSD supported etc.)
Seeed Studio SBCA203 (Version 2) Carrier Board for Jetson Nano/Xavier NX/TX2 NX with compact size and rich ports (Wi-fi, Bluetooth, SSD supported etc.)
SKU: 1249205- Product: A203 Version 2 Carrier Board
- Brand: Seeed Studio
- NVIDIA Gigabit Ethernet: RJ45 Gigabit Ethernet Connector (10/100/1000)
- DC Power: DC Input Power TE Connector
- Compact size (87mm x 52mm x 26mm) saves precious space
- Compact & all-in-one design
SKU: 1249205 -
-
