Seeed Studio
Showing 49–96 of 284 results
-
-
-
-
Temperature & Humidity Sensor
Grove – I2C High Accuracy Temperature Sensor(MCP9808)
SKU: 765928- Operating Voltage:3.3V/5V
- Operating Range:-40°C to +125°C
- Digital Interface: I2C standard 400 kHz
- User-programmable registers, allow for user-selectable settings
- I2C interface works great with Arduino
SKU: 765928 -
-
Shield for Arduino
SeeedStudio Grove Beginner Kit for Arduino
SKU: 601890- Operating voltage: 5 V
- Tutorials for guidance
- Fully compatible with Arduino UNO
- High performance, low power 8 bit ATmega328 MU microcontroller
- Serial converter CP2102N chip (to communicate the Seeeduino with a computer by using a micro-USB cable)
- 2 on-board Grove connectors
- 14 Digital I/O Pins (6 PWM outputs)
- 6 Analog inputs
- ISP header
- Arduino UNO-R3 shield compatible
- Micro USB programming and power supply
- Supports Windows, Mac OS, and Linux
SKU: 601890 -
IMU, Accelerometer, Magnetometer & Gyroscope
SeeedStudio Grove 3 Axis Digital Accelerometer
SKU: 597492- Durable with 10,000g high shock survivability
- Low power and low profile capacitive MEMS sensor
- Configurable samples per second rate
- 3 axis motion/orientation sensing
- Digital output (I2C)
- Off mode current: 0.4μA
- Standby mode current: 2μA
- Active mode current: 47 μA at 1 ODR
- Test range: ±1.5g
- Sensitivity: 21LSB/g
- Suli-compatible library
SKU: 597492 -
-
-
-
Battery Charging Boards
Seeed Studio Lipo Rider Plus (Charger/Booster) – 5V/2.4A USB Type C
SKU: 1670436- Support for shutdown output (IO control/manual switch)
- Onboard charge status indicator LED + Onboard 4-segment power indicator LED
- Ultra-small 2.5cm*4.1cm
- Single-layer layout easy mount.
SKU: 1670436 -
-
-
Arduino Compatible Boards
SeeedStudio Grove Shield for Seeeduino XIAO
SKU: 778510- Power Supply: 5V / 3.7V Lithium Battery
- Load Capacity: 800mA
- On-board Lithium Battery Charging and Management Function
- Grove connectors (Grove IIC*2, Grove UART*1), all 14 GPIO led out
- Compact and Breakable Design
SKU: 778510 -
RTC Module
SeeedStudio Grove RTC
SKU: 599811- Vcc: 3.3 V to 5.5 V
- Battery voltage: 2.0V to 3.5 V
- ROHS: YES
- I2C serial interface
- Programmable square-wave output signal
- 56-byte, battery-backed, NV RAM for data storage
- Automatic power-fail detect and switch circuitry
- Counting of time intervals valid up to 2100
- Consumes less than 500nA in battery-backup mode
SKU: 599811 -
-
-
PIR / IR and Optical Sensor
SeeedStudio Grove VOC and eCO2 Gas Sensor (SGP30)
SKU: 1135221- Working Voltage:3.3V/5V
- Output range :
- TVOC 0 ppb to 60000ppb ,
- COâ‚‚eq 400 ppm to 60000 ppm
- Sampling rate:
- TVOC 1HZ
- COâ‚‚eq 1HZ
- Resoulation:
- TVOC :0 – 2008 ppb / 1 ppb
2008 – 11110 ppb / 6 ppb
11110 – 60000 ppb / 32 ppb - COâ‚‚eq :400 – 1479 ppm / 1 ppm
1479 -5144 ppm / 3 ppm
5144 – 17597 ppm / 9 ppm
17597 – 60000 ppm / 31 ppm
- TVOC :0 – 2008 ppb / 1 ppb
- Default I2C address 0X58
SKU: 1135221 -
-
-
Pressure Sensor
SeeedStudio Grove High Precision Barometer Sensor (DPS310)
SKU: 672599- High-Pressure Precision: ± 0.002 hPa (or ±0.02 m)
- High Pressure Accuracy: ± 0.06 hPa (or ±0.5 m)-Relative; ± 1 hPa (or ±8 m)-Absolute
- Wide Range: Pressure: 300 –1200 hPa; Temperature: -40 – 85 °C.
- Easy to Use: Grove IIC (with interrupt) / SPI
- Low power consumption
SKU: 672599 -
Water TDS, pH, Flow, Level Sensor
SeeedStudio Grove EC Sensor Kit (DJS1CBlack )
SKU: 765922- Operating voltage: 3.3V/5V
- EC Range : 0-2000us/cm
- Resolution: ±5%(STP)
- Operating temperature: 5-80℃
- Response time: ＜10sec
- Compact size for easy deployment
- Support with both Arduino and Rasberry Pi
SKU: 765922 -
Bluetooth and NRF Modules
HM-BT4502 Bluetooth Low Energy (BLE) Pass-through Module
SKU: 755016- Universal serial port design, full-duplex two-way communication, minimum baud rate support 9600 bps
- Default connection interval is 30 millisecond, fast connection
- Support 2M symbol transmission and 244 bytes packet transmission
- Support AT commands for basic settings
SKU: 755016 -
Educational Kits
SeeedStudio Grove Creator Kit – Gamma (40 in 1 Sensor Kit)
SKU: 606654- Carefully selected Grove sensors (input) and actuators (output)
- 40 different Grove modules in a kit
- All modules are packed in protective plastic bags
- Grove connector cables
- Compatible with:
i) Arduino, requires Grove Base Shield
ii) Raspberry Pi, requires GrovePi HAT
iii) micro:bit, requires BitMaker or BitMaker Lite
SKU: 606654 -
IoT Development Boards
Seeed Studio Grove – Vision AI Module V2 – Arm Cortex-M55 & Ethos-U55, TensorFlow and PyTorch supported, Arduino, Raspberry Pi, Seeed Studio XIAO, ESP-based dev board
IoT Development BoardsSeeed Studio Grove – Vision AI Module V2 – Arm Cortex-M55 & Ethos-U55, TensorFlow and PyTorch supported, Arduino, Raspberry Pi, Seeed Studio XIAO, ESP-based dev board
SKU: R100188- Microcontroller: Himax WiseEye2 HX6538 with dual-core Arm Cortex-M55 and integrated Arm Ethos-U55
- Input Voltage (V): 5V
- Power Supply Option: Dual 7-pin connector, Type-C & Grove Connector
- Onboard: PDM Microphone, SD Card Slot
- Baud Rate: 115200
SKU: R100188 -
-
-
-
Water TDS, pH, Flow, Level Sensor
SeeedStudio Grove ORP Sensor Kit (501Z)
SKU: 765933- Work voltage: 3.3V/5V
- Work temperature: 5℃-70℃
- Support with both Arduino and Rasberry Pi.
- RangeReference electrode internal resistance: ≤10k
- Resolution Electrode stability: ±8mv/24
- Compact size for easy deployment.
Â
SKU: 765933 -
-
Thermal Cameras
Out of stock
SeeedStudio Grove -Thermal Imaging Camera-MLX90641 16×12 IR Array with 110 Degree FOV
Thermal CamerasSeeedStudio Grove -Thermal Imaging Camera-MLX90641 16×12 IR Array with 110 Degree FOV
SKU: 672589- Manufacturer Part Code: 101020892
- Temperature measurement range:-40℃~300℃
- I2C Grove interface
- Input Supply Voltage: 3 ~ 5 VDC.
- High FOV (field-of-view) of 110°x75° to capture more area
- Wide temperature measurement range (-40℃~300℃)
- I2C Grove interface for easy communication with an MCU
- Fully calibrated IR array for convenient setup
SKU: 672589
