ELECROW is a leading provider of innovative electronics and educational tools. We offer a wide range of high-quality products including development boards, sensors, 3D printing accessories, and DIY kits designed for makers, educators, and tech enthusiasts. Our commitment to empowering creativity and learning is reflected in our comprehensive range of products and resources.
At ELECROW, we strive to foster a vibrant community where ideas come to life through technology. Explore our selection to find everything you need to bring your projects to fruition, whether you’re a beginner or a seasoned pro in the world of electronics and coding.
ELECROW
Showing 1–48 of 55 results
-
HMI LCD Display
ELECROW ESP32 display 7.0 Inch HMI Display 800×480 RGB TFT LCD Touch Screen Compatible with Arduino/LVGL/PlatformIO/ Micropython Without Acrylic Case
HMI LCD DisplayELECROW ESP32 display 7.0 Inch HMI Display 800×480 RGB TFT LCD Touch Screen Compatible with Arduino/LVGL/PlatformIO/ Micropython Without Acrylic Case
SKU: 1855142- Model: ELECROW ESP32 display-7.0 Inch HMI Display 800×480 RGB TFT LCD Touch Screen Compatible with Arduino/LVGL/PlatformIO/ Micropython Without Acrylic Case
- 7.0 LCD-TFT Capacitive HMI touch display module
- 800+480 screen resolution Capacitive Touch
- Color Depth 16M Frequency up to 240 MHz
- 512KB SRAM
- 4 MB Flash memory
- 2*UARTO,1*GPIO,1*Battery interface
SKU: 1855142Water TDS, pH, Flow, Level SensorELECROW Crowtail- PH Sensor 2.0
SKU: 1855118- Model: ELECROW Crowtail- PH Sensor 2.0
- The PH sensor can be used to test the PH value of the aqueous solution.
- which can be widely used in environmental monitoring, the chemical industry, and so on.
- Range of measurement: 0-14 pH
- Measuring temperature: 0-60℃
- Response time: less than 2min
- Working voltage: 5v
SKU: 1855118Sensor ICsELECROW Crowtail- DWM1000 UWB(Ultra Wide Band) Indoor Positioning module
SKU: 1855109- Model: ELECROW Crowtail- DWM1000 UWB(Ultra Wide Band) Indoor Positioning module
- Integrated DW1000 chip, 4 channels with working frequency from 3.5 GHz to 6.5 GHz
- STM32F103 main control chip, simple integration, no RF design required
- Support two-way ranging and TDOA
- Support serial communication
- Supports IEEE 802.15.4-2011
SKU: 1855109HMI LCD DisplayOut of stock
ELECROW ESP32 display-5.0 Inch HMI Display 800×480 RGB TFT LCD Touch Screen Compatible with Arduino/LVGL/PlatformIO/ Micropython Without Acrylic Case
HMI LCD DisplayELECROW ESP32 display-5.0 Inch HMI Display 800×480 RGB TFT LCD Touch Screen Compatible with Arduino/LVGL/PlatformIO/ Micropython Without Acrylic Case
SKU: 1855141- Model: ELECROW ESP32 display-5.0 Inch HMI Display 800×480 RGB TFT LCD Touch Screen Compatible with Arduino/LVGL/PlatformIO/ Micropython Without Acrylic Case
- 5.0° LCD-TFT Capacitive HMI touch display module
- 800*480 screen resolution
- Color Depth 16M
- Capacitive Touch
- Frequency up to 240 MHz
- 512KB SRAM
- 4 MB Flash memory
- 2*UARTO, 1 *GP10,1 *Battery interface
SKU: 1855141HMI LCD DisplayELECROW ESP32 display-4.3 Inch HMI Display 480×272 RGB TFT LCD Touch Screen Compatible with Arduino/LVGL/PlatformIO/ Micropython Without Acrylic Case
HMI LCD DisplayELECROW ESP32 display-4.3 Inch HMI Display 480×272 RGB TFT LCD Touch Screen Compatible with Arduino/LVGL/PlatformIO/ Micropython Without Acrylic Case
SKU: 1855140- Model: ELECROW ESP32 display-4.3 Inch HMI Display 480×272 RGB TFT LCD Touch Screen Compatible with Arduino/LVGL/PlatformIO/ Micropython Without Acrylic Case
- dual-core 32-bit LX6 microprocessor
- built-in wireless communication 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5.0.
- LCD 480 x 272 4.3 inches TFT-LCD
- Applications: Automotive, Medical, Industrial, and IoT applications.
SKU: 1855140TFT LCD DisplaysELECROW ESP32 Terminal–with ESP32 3.5 inch parallel 480×320 TFT capacitive touch RGB display(RGB by chip ILI9488)
TFT LCD DisplaysELECROW ESP32 Terminal–with ESP32 3.5 inch parallel 480×320 TFT capacitive touch RGB display(RGB by chip ILI9488)
SKU: 1855135- Model: NTL-ELECROW ESP32 Terminal–with ESP32 3.5 inch parallel 480×320 TFT capacitive touch RGB display(RGB by chip ILI9488)
- ESP32-S3 module with 16MB Flash and 8 MB PSRAM.
- Wi-Fi Protocol: 802.11b/g/n (802.11n up to 150Mbps).
- Bluetooth 5 support for wireless connectivity.
- 3.5-inch TFT LCD with 320*480 resolution and capacitive touch panel.
- Supports Arduino, LVGL, PlatformIO, and Micropython for development.
- Onboard charging chip and TYPE-C interface for easy charging.
- 4 Crowtail interfaces (HY2.0-4P connector) for versatile sensor connections.
SKU: 1855135Raspberry Pi HatsELECROW Crowtail shield for Raspberry Pi Pico (RP2040)
SKU: 1855107- Model: ELECROW Crowtail shield for Raspberry Pi Pico (RP2040)
Crowtail GPIO Expansion Board for Pico: Separate the pins and power supply of the board, providing 10 additional Crowtail ports - Rich Peripherals for Crowtail: Provides 10 Crowtail ports, including 2 I2C, 2 UART, 3 digital, 3 analogs, 1 SPI port, 1 power switch, 1 BAT interface, and SWD debugging interface.
- No soldering required, plug and play: support direct connection to Crowtail sensors
- Platform support: MicroPython & Arduino
SKU: 1855107Environmental SensorsELECROW Crowtail- Water Sensor 2.0
SKU: 1855128- Model: ELECROW Crowtail- Water Sensor 2.0
- Crowtail compatible interface
- Low power consumption
- High sensitivity
- Dimensions(mm): 40.0(L)x20.0(W)x6.8(H)
- Applications Ideas
- Rainfall detecting
- Liquid leakage
- Tank overflow detector
SKU: 1855128DIY Hobby Project PartsElecrow Crowtail-Starter Kit for Micro:bit No Mainboard
SKU: R101635- Plug-and-play with various Crowtail modules, no soldering or complex wiring required.
- Includes over 20 clear and step-by-step tutorials for using Micro:bit and sensors.
- Enables endless creative possibilities and fun projects with Micro:bit.
SKU: R101635HMI LCD DisplayOut of stock
ELECROW ESP32 display-2.8 Inch HMI 240×320 Display SPI TFT LCD Touch Screen Compatible with Arduino/LVGL/Esphome- Homeassistant/PlatformIO /Micropython Without Acrylic Case
HMI LCD DisplayELECROW ESP32 display-2.8 Inch HMI 240×320 Display SPI TFT LCD Touch Screen Compatible with Arduino/LVGL/Esphome- Homeassistant/PlatformIO /Micropython Without Acrylic Case
SKU: 1855137Model:ELECROW ESP32 display-2.8 Inch HMI 240×320 Display SPI TFT LCD Touch Screen Compatible with Arduino/LVGL/Esphome- Homeassistant/PlatformIO /Micropython Without Acrylic Case
Processor:ESP32-WROOM-32-N4
Resolution:240 x 320SKU: 1855137LORA ModuleOut of stock
ELECROW Crowtail- Lora RA- 08H/LoRaWAN Module for Long Range Communication (803- 930Mhz）
LORA ModuleELECROW Crowtail- Lora RA- 08H/LoRaWAN Module for Long Range Communication (803- 930Mhz）
SKU: 1855114- Model: ELECROW Crowtail- Lora RA- 08H/LoRaWAN Module for Long Range Communication (803- 930Mhz）
- High sensitivity: -138dBm @125Kz SF12
- Support LoRa/(G)FSK/BPSK/(G)MSK modulation
- Support multiple sleep modes: depth sleep current is low to 0.9uA
- Support spread spectrum factor: SF5/SF6/SF7/SF8/SF9/SF10/SF11/SF12
SKU: 1855114HMI LCD DisplayELECROW ESP32 display-3.5 Inch HMI Display 320×480 SPI TFT LCD Touch Screen Compatible with Arduino/LVGL/PlatformIO/ Micropython Without Acrylic Case
HMI LCD DisplayELECROW ESP32 display-3.5 Inch HMI Display 320×480 SPI TFT LCD Touch Screen Compatible with Arduino/LVGL/PlatformIO/ Micropython Without Acrylic Case
SKU: 1855138- Model: ELECROW ESP32 display-3.5 Inch HMI Display 320×480 SPI TFT LCD Touch Screen Compatible with Arduino/LVGL/PlatformIO/ Micropython Without Acrylic Case.
- LCD 320 x 480 3.5 inches.
- TFT-LCD with driver IC ILI9488.
- Rich peripheral interfaces.
- integrated WiFi and Bluetooth.
SKU: 1855138HMI LCD DisplayELECROW ESP32 display-2.4 Inch HMI Display 240×320 SPI TFT LCD Touch Screen Compatible with Arduino/LVGL/Esphome- Homeassistant/PlatformIO /Micropython Without Acrylic Case
HMI LCD DisplayELECROW ESP32 display-2.4 Inch HMI Display 240×320 SPI TFT LCD Touch Screen Compatible with Arduino/LVGL/Esphome- Homeassistant/PlatformIO /Micropython Without Acrylic Case
SKU: 1855136- Model: ELECROW ESP32 display-2.4 Inch HMI Display 240×320 SPI TFT LCD Touch Screen Compatible with Arduino/LVGL/Esphome- homeassistant/PlatformIO /Micropython Without Acrylic Case
- Built-in LVGL demo interface and Arduino example, plug and play.
- LCD 240*320 2.4 inches TFT-LCD with driver IC ILI9341V.
- Rich peripheral interfaces.
- HMI touch screen with a 240×320 resolution LCD display.
SKU: 1855136GPS ModulesOut of stock
ELECROW Crowtail-4G SIM A7670E Module GPS Breakout Board support GPS/GLONASS/BDS
GPS ModulesELECROW Crowtail-4G SIM A7670E Module GPS Breakout Board support GPS/GLONASS/BDS
SKU: 1855130- Model: ELECROW Crowtail-4G SIM A7670E Module GPS Breakout Board support GPS/GLONASS/BDS
- LTE Cat1 wireless module (SIM A7670E) for 4G data and voice communication
- Supports multiple LTE bands (B1/B3/B5/B7/B8/B20), WCDMA, and GSM networks
- Protocols include TCP/IP, FTP, HTTP, and satellite navigation systems (GPS/GLONASS/BDS)
- Features a charging interface and a 3.5mm headphone jack for phone calls.
SKU: 1855130TFT LCD DisplaysELECROW ESP32 Terminal- 3.5 inch 480×320 SPI TFT capacitive touch display with OV2640 camera
TFT LCD DisplaysELECROW ESP32 Terminal- 3.5 inch 480×320 SPI TFT capacitive touch display with OV2640 camera
SKU: 1855134- Integrated ESP32-S3 module, which supports 2.4 GHz Wi-Fi and Bluetooth 5 (LE)
- 5-inch TFT 320*480 resolution touch LCD display
- Support, USB, UART, SPI, I2C, PWM, and I2S communication protocols
- Supports 1T1R mode, data rate up to 150 Mbps, Wireless Multimedia (WMM)
- Compatible with Arduino/Micropython
SKU: 1855134Shield for ArduinoELECROW ELE Can-Bus Shield-V1.5
SKU: 1855133- Model: ELECROW ELE Can-Bus Shield-V1.5
- CAN-BUS is a common industrial bus
- long travel distance
- Medium communication speed and high reliability
- Widely used as the automotive diagnostic bus
- Also commonly used on modern machine tools
SKU: 1855133RTC ModuleELECROW RTC Data Logger Shield
SKU: 1855145- Model: ELECROW RTC Data Logger Shield
- The RTC Data Logger shield adds storage to your Arduino project.
- It supports SD, SDHC, or MicroSD TF cards and with an RTC onboard.
- Use the on-board toggle switch to select the SD card type.
- when you want to plug an SD card into it, you should select the switch in the right direction.
SKU: 1855145HMI LCD DisplayOut of stock
Elecrow RC070 7 inch 1024*600 LCD Display with Touch Screen Without Acrylic Case
HMI LCD DisplayElecrow RC070 7 inch 1024*600 LCD Display with Touch Screen Without Acrylic Case
SKU: R101641- Appearance Size: 16412414.4mm
- Screen Size: 155*88.5mm
- Resolution: 1024×600
- Touch Screen: Capacitive touch screen
- Compatibility: Raspberry Pi (Raspbian, Ubuntu), Windows 10/8.1/8/7, BB Black, BeagleBone
SKU: R101641HMI LCD DisplayOut of stock
Elecrow 10.1 inch Display IPS 1280×800 Acrylic Case Touch Screen Compatible with Raspberry Pi Jetson Nano PC raspberry Pi Boards
HMI LCD DisplayElecrow 10.1 inch Display IPS 1280×800 Acrylic Case Touch Screen Compatible with Raspberry Pi Jetson Nano PC raspberry Pi Boards
SKU: R101639- Screen Size: 10.1 inches
- Screen Type: IPS
- Resolution: 1280 x 800
- Touch Screen Type: Capacitive
- Touch IC: SIS9200
- Power Input: MicroUSB (5V)
SKU: R101639IoT Development BoardsELECROW ESP32 Development Board with 3.5in 320×480 Multi-Touch capactive Screen, support Bluetooth & WiFi
IoT Development BoardsELECROW ESP32 Development Board with 3.5in 320×480 Multi-Touch capactive Screen, support Bluetooth & WiFi
SKU: R123310- SoC: ESP32-WROVER-B module
- CPU: Dual-core Xtensa@ 32-bit LX6 MCU
- Connectivity: 802.11 b/g/n 2.4GHz Wi-Fi, Bluetooth v4.2 BR/EDR and Bluetooth LE standards
- Display: 3.5 inch, LCD @320×480, Capacitive with 2-point multitouch
- Power Supply: DC 5V/2A. 5V/1A
- Operating Temperature: -20 to +85 °C
SKU: R123310HMI LCD DisplayOut of stock
Elecrow CrowVision 11.6” Raspberry Pi Capacitive Touch Display HD 1366*768 IPS Screen for RPI LattePanda/Beaglebone/Jetson Nano, etc Plug Power Adapter Plug
HMI LCD DisplayElecrow CrowVision 11.6” Raspberry Pi Capacitive Touch Display HD 1366*768 IPS Screen for RPI LattePanda/Beaglebone/Jetson Nano, etc Plug Power Adapter Plug
SKU: R101638- Touch Type: 5-point Capacitive Touch
- Resolution: 1366*768
- Color Depth: 16M
- Viewing angle: 178°Wide Viewing Angle
- Display Type: IPS Panel
- Screen Type: TFT-LCD
- External power supply: 12V-2A
SKU: R101638Advance Development BoardsELECROW Silicone Protective Case for Micro: bit V2/V1.5 Color Green
SKU: 1855146- Model: ELECROW Silicone Protective Case for Micro: bit V2/V1.5 Color Green
- slots to access the USB port, buttons and JST connectors.
- It’s especially designed to allow the on-board LED matrix to be viewed when lighted up.
- It’s aimed to create a more interesting programming environment for children, getting rid of the past boring programming life.
SKU: 1855146Temperature & Humidity SensorELECTROW Crowtail- Temperature& Humidity Sensor 2.0
SKU: R123308- Work Voltage: 3.3V ~ 5V
- Measuring Range: Humidity: 20% – 90% RH; Temperature: 0 ~ 50 °C
- Signal Collecting Period: 2S
- Accuracy: Humidity: ±5% RH; Temperature: ±2°C
- Dimensions(mm):40.0(L)x20.0(W)x7.6(H)
SKU: R123308
Robu.in wants to send you updates. Click Allow to subscribe.
