Dimension Engineering was founded in 2004 by two Carnegie Mellon University graduates.
We aim to sell easy-to-use electronic and electromechanical products to the hobbyist, educational, and research markets.
Our products are always competitively priced without compromising on quality.
All of Dimension Engineering’s products are designed, assembled, tested, and packaged by us. We do this full-time and have a substantial investment in SMT manufacturing equipment.
We are based in Hudson, Ohio but we hope to be taking over the rest of the world pretty soon.
Dimension Engineering
Showing all 12 results
-
Dimension Engineering Motor Drivers
Sabertooth Dual 12A Motor Driver
SKU: 4692- 12A continuous, 25A peak per channel Up to 24V in
- Synchronous regenerative drive
- Ultra-sonic switching frequency
- Thermal and overcurrent protection
- Lithium protection mode
- Peak Current (A): 25A
- Continuous Current (A): 12
- Operating Voltage(VDC): 18 to 24V
- No. of Channels: 2
SKU: 4692 -
Dimension Engineering Motor Drivers
Sabertooth Dual 25A Motor Driver
SKU: 4698- 25A continuous, 50A peak per channel
6-30V nominal, 33.6V absolute maximum - Synchronous regenerative drive
- Ultra-sonic switching frequency
- Thermal and overcurrent protection
- Lithium protection mode
- Input modes: Analog, R/C, simplified serial, packetized serial
SKU: 4698 - 25A continuous, 50A peak per channel
-
Dimension Engineering Motor Drivers
Sabertooth Dual 32A Motor Driver
SKU: 4702- 32A continuous, 64A peak per channel
- 6-30V nominal, 33.6V absolute maximum
- Synchronous regenerative drive
- Ultrasonic 30 kHz switching frequency
- Thermal and overcurrent protection
- Battery protection mode
- USB control and monitoring
- USB serial converter mode for Kangaroo x2
- Configurable current limiting
- Custom user modes
- 12-bit motor outputs
SKU: 4702 -
Refurbished, Refurbished & Partial Working, Refurbished Motors | Drivers | Pumps | Actuators
Refurbished – Sabertooth Dual 25A Motor Driver
Refurbished, Refurbished & Partial Working, Refurbished Motors | Drivers | Pumps | ActuatorsRefurbished – Sabertooth Dual 25A Motor Driver
SKU: 1824745- 25A continuous, 50A peak per channel
6-30V nominal, 33.6V absolute maximum - Synchronous regenerative drive
- Ultra-sonic switching frequency
- Thermal and overcurrent protection
- Lithium protection mode
- Input modes: Analog, R/C, simplified serial, packetized serial
SKU: 1824745 - 25A continuous, 50A peak per channel
-
-
Dimension Engineering Motor Drivers
Kangaroo X2 Motion Controller
SKU: 15839- Model: Kangaroo x2
- 2 channel self-tuning PID controller
- Position or speed control
- Quadrature encoder feedback or potentiometer feedback
- Support for limit switches and mechanical stops
- Analog, R/C, and serial inputs
SKU: 15839 -
Dimension Engineering Motor Drivers
BattleSwitch radio controlled 10A relay (Dimension Engineering)
SKU: 6314- 30mA typical draw from receiver
- 12-inch servo pigtail
- Switching Voltage: 10A @ 28VDC, 12A @ 120VAC, 10A @ 240VAC.
- Relay resistance: 100 mΩ max
- operating voltage: 3.5V to 5.5V (on servo pigtail)
SKU: 6314 -
-
Dimension Engineering Motor Drivers
Sabertooth Dual 5A Motor Driver for R/C
SKU: 4689- Operating Voltage(VDC): 6-18
- Peak Current (A): 10
- Continuous Current (A): 5
- No. of Channels: 2
- Synchronous regenerative drive
- Ultra-sonic switching frequency
- Thermal and overcurrent protection
- Lithium protection mode-compatible with: 6-12 cell NiMH or NiCd, 2s-4s LiPo, 6V or 12V lead acid (not 18+V lead acid!)
SKU: 4689 -
Brushed / Brushless DC motor Driver
Sabertooth Dual 5A Motor Driver
SKU: 4686- Input Voltage: 6V to 18V
- Compatible with: 6-12 cell NiMH or NiCd, 2s-4s LiPo
- 5A continuous per channel, 10A peak
- Synchronous regenerative drive
- Ultra-sonic switching frequency
- Thermal and overcurrent protection
- Lithium protection mode
SKU: 4686
