M5 Stack COM.GPS Module (NEO-M8N) With Antenna

Availability:

Out of stock

Approx Restocking Date: 25 to 30 Days
SKU: 846409
  1. Antenna type: external GPS antenna
  2. Can receive data from 3 GNSS systems at the same time
  3. GPS module (NEO-M8N) built-in flash memory, through u-center-just-for-Windowsupgrade firmware
  4. Protocol: NMEA, UBX, RTCM

 2,549.00 (Incl. GST)

Out of stock


Free Delivery above ₹499
Free Delivery
above ₹499
1 Year Warranty
15 Days Warranty
Cash On delivery
Cash on Delivery*

Didn’t find what you are looking for?

You must register to use the waitlist feature. Please login or create an account
Brand: M5 STACK
Category: GPS Modules

COM.GPS is a satellite positioning module in the M5Stack stacking module series. It is developed based on the NEO-M8N module and is equipped with an active antenna. The NEO-M8 can spend a small amount of time, conduct high-sensitivity acquisition, and keep the system low power consumption. NEO-M8N integrates the 72-channel u-Blox M8 GNSS engine, supports multiple GNSS systems: BeiDou, Galileo, GLONASS, GPS / QZSS, allowing simultaneous reception 3 Data from a GNSS system. Programmable FLASH is integrated inside the module, which can read and write data. The module’s high sensitivity, small static drift, low power consumption, and compact size are very suitable for applications in vehicles, handheld devices such as PDAs, vehicle monitoring, mobile phones, cameras, and other mobile positioning systems. The UART communication protocol is used between the M5Core and the GPS module, and the serial port connection pins can be modified through the dial switch on the back.

If you want to change the serial port baud rate, please click ( u-center-just-for-Windows ).

Note: In order to get a good signal from the GPS module, please place the module outdoors when using it.

UART protocol: baud rate (default is 9600bps), data bit (8 bits), start bit (1 bit), stop bit (1 bit), check bit (none).

COM.GPS RXD/TXD can be connected to M5Stack’s UART (TX(0/13/17)RX(5/15/16)) by setting the DIP switch, M5Stack Fire GPIO16 /GPIO17 is connected to PSRAM by default. It is recommended to use any one of the remaining two groups of pins.

Applications:
  1. GPS-based logistics tracking management
  2. Driverless car positioning

Features:

  1. Antenna type: external GPS antenna
  2. External antenna port: SMA
  3. Can receive data from 3 GNSS systems at the same time
  4. Horizontal position accuracy: minimum of 2.5m
  5. GPS module (NEO-M8N) built-in flash memory, through u-center-just-for-Windows upgrade firmware
  6. Protocol: NMEA, UBX, RTCM
  7. Industry-leading -167dBm sensitivity
  8. Backward compatible with NEO‑7 and NEO‑6 series

Package Includes:

1 x COM.GPS Module

1 x External Antenna

SKU: 846409 Category:
Item Type:

GPS Module

Receiver Type

GPS:L1C/A SBAS:L1C/A QZSS:L1C/A GLONASS:L1OF BediDou:B1 Galileo:E1B/C

Positioning Time

Cold start:26S Hot start:1.5S

Update Rate

Separate GNSS 10Hz,Parallel GNSS 5Hz

Rate Accuracy

0.05m/s

Height Limit

50000m

Speed Limit

500m/s

Operating Temperature (°C)

-40 to 80

Antenna Type:

SMA

Length (mm):

54

Width (mm):

54

Height (mm):

14

Weight (g):

28

Shipping Weight 0.03 kg
Shipping Dimensions 17 × 7 × 5 cm
15 Days Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of Robu customers from any kind of manufacturing defects. Replacement will be done against manufacturing defects.


What voids warranty:

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Schematic

Quick Start

Questions and answers of the customers

There are no questions yet. Be the first to ask a question about this product.

Only registered users are eligible to enter questions
Country Of Origin: China
icon   

Robu.in wants to send you updates. Click Allow to subscribe.