If you want to make a device where you can control the volume of any sound system then this TPA3118 PBTL Mono Digital Amplifier Board 1X60W 12V 24V Power Amplifier Module board is essential for you. In this module, you will get a specification of 60 w and this board can operate in both 12 v or 24 v.
This power amplifier board is gaining so much popularity because of good sound quality and you can make simple but best projects and Students are like these types of the board because of its effective cost. It has high output and low power consumption.
NOTE : HW-327 printed on module does not effect the functionality of product .
Features:
- Sound quality is very good by using this module.
- Mono digital audio power amplifier chip.
- High output and low power consumption.
Package Includes :
1 x TPA3118 PBTL Mono Digital Amplifier Board 1X60W 12V 24V Power Amplifier Module.
raghu (verified owner) –
awesome product
raghu –
Harish Kumar (verified owner) –
Very good amplifier module. Works with 12v 50w solar panel by connecting through dc to dc buck & boost converter.
Harish Kumar –
Samir Das (verified owner) –
Very good product
Samir Das –
Sai Kumar (verified owner) –
just ultimate ,12v and 2amps is perfect power input and I’m using 3000watts Intex subwoofer and Philips satelite speakers ,the quality is just amazing
very worthfull module ,and this gonna make my home theatre setup in budget
Sai Kumar –
kpuru999 (verified owner) –
sound quality is very good,you have to use 60watts speaker for a quality audio ,you have to add some bass boosting circuit for woofers to improve bass, sound depends on input voltage.
kpuru999 –
christyroys007 (verified owner) –
Bought 2 of these boards, and they work fine. I use these to drive my 2 Pioneer 6×9 speakers.
A small issue that I face is that when the board power-up and power down, there’s a speaker pop. I added the anti-pop mod from 360customs and the start-up pop is gone, but the power down pop is still there.
The chip doesn’t have a heat sink and it slightly heats up even at low volumes.
The caps on the board are 25V, better to upgrade to 35V or 50 V if you plan to use it with a 24V source.
The delivery was fine, got it in 2 days.
christyroys007 –
Malay Mukherjee (verified owner) –
excellent with suitable pre amp and tone control at 12v.
Malay Mukherjee –
Santu chutia –
good
Santu chutia –
karansharmaktr0 (verified owner) –
I am using 4 inch 4oms 30 watt woofer in 19 volt good bass an clearty the amp board is small but the sound is awesome ???
karansharmaktr0 –
Shubham Paliwal (verified owner) –
Really Awesome sound quality & i am using 50W 4/8 ohm Subwoofer with Bluetooth module.
Shubham Paliwal –
satish.isro (verified owner) –
Quick delivery even in these trying times. The board works as specified. Full power output is reached with no distortion in audio output. Audio is clear. No noise, One caution: Solder any pins at lower temperature or solder quickly to avoid damage to pads.
satish.isro –
Jimmy (verified owner) –
I m using it for sub woofer. value for money
Jimmy –
Rudra Ghosh (verified owner) –
Good Frequency response.
Rudra Ghosh –
Ebrahim Shaikh (verified owner) –
Bast amplifier good delivery
Ebrahim Shaikh –
cascam330 (verified owner) –
With some tweaks it puts up very good sound.
cascam330 –
sashi (verified owner) –
For the price it works well without any mods. Did not expect such big sound from such a small module and the chips do not warm even on moderate volume levels. Keep up the good work Robu and offer such products at such good prices.
sashi –
Prasenjit Mallick (verified owner) –
Very good delivery time.
Product also good.
Prasenjit Mallick –
jimmyg3k (verified owner) –
Value for money. I m running this amp powered by a disposed 12v car battery with 8ohms 8″ Boston speaker
jimmyg3k –
skbhel111 (verified owner) –
Very clear saund
skbhel111 –
Rahul Purkayastha (verified owner) –
The sound quality is very good
Rahul Purkayastha –
arpan0823 (verified owner) –
The sound quality is pretty good. The loudness depends on the power supply though.
arpan0823 –
pandia rahman (verified owner) –
excellent class d amplifier board. voice crystal clear. working well with LM324 bass treble board. happy to use this
pandia rahman –
virender_k (verified owner) –
good crystal clear sound
virender_k –
Pandia Rajan (verified owner) –
Excellent product. Working well. Audio output quality super. Voice crystal clear and with working LM324 bass treble board. DC supply 18V. Happy to use this class d amplifier.
Pandia Rajan –
Pandia Rahman (verified owner) –
excellent amplifier board. audio quality very good and crystal clear. very happy. working with LM324 bass treble board. excellent class d amplifier.
Pandia Rahman –
Rahul Purkayastha (verified owner) –
Good sound quality ,?
Rahul Purkayastha –
Uday Deshwal (verified owner) –
This Small embedded chip is very Effective. I am very much satisfied and thanks for Robou.in for next day delivery.
Uday Deshwal –
Sandeep Kumar (verified owner) –
good sound quality. only that the inductors get hot.
Sandeep Kumar –
rupandey642 (verified owner) –
Breath leaning sound, product quality is fine.
rupandey642 –