BGC v3.15 MOS Large Current 2-axis Brushless Gimbal Controller Driver is the original BaseCam SimpleBGC 8-bit controller board (formerly also called AlexMos). While this board has been superseded by the 32-bit version, this 8-bit version is still available in the marketplace and is actively used and supported.
It still produces outstanding results!!!
Without the extension board, this controller can be used for building high-quality 2-axis camera stabilizing systems. The controller can also be used for 3-axis control systems with the addition of the extension board.
In either case, from a functional perspective, the newer 32-bit board is 100% backward compatible with this board, and users of this board can freely upgrade systems from this board to the newer 32-bit board.
In addition, the management software is backward compatible, so it is possible (or preferred) to use a new version of the GUI (SimpleBGC’s management software) with this board- giving an improved experience with this board and also further making an upgrade to the 32-bit board as easy as possible.
Adjustment
The controller board is configured through our multi-platform software product (SimpleBGC GUI). You may run this on a PC, Mac, or Linux. A version is also available for Android.
Note that the board has firmware and the GUI software runs externally (on a PC, Mac, or Linux, etc) but the GUI keeps track of the firmware number and it requires that the GUI revision be at or newer than the board’s firmware.
While there is a User Manual for the 8-bit version, since you may use the GUI for the 32-bit board with this board (the 8-bit) it may nonetheless be instructive to obtain the newer and more thorough User Manual for the newer 32-bit version. This is especially pertinent if you choose to use the newer version of the GUI with this board. Remember however you can only use firmware for the 8-bit board on the 8-bit board.
Note:
We recommend to don’t flashing/Updating the Default firmware. Updated or new firmware may cause a problem of connectivity with PC/Laptop.
Warm Notice:
Wrong use way may damage the control board. Please follow the instructions:
1. Recommended power supply is 12V(3s battery).
2, Camera must be fixed in the head (without any loosening).
3. Adjust the Gopro camera to the left or right,so that the camera is at Horizontal level.
4. Before camera fixed in the gimbal , please do not push ” on ” button to have power.
5.The gimbal camera must be use belt tight, otherwise it will have problems. And if you do this many times, it will cause damage to the flight controller.
Features :
- Adopts MOS tube drive, with larger current
- Support 2-8 series gimbal motor
- Peak current 10A
- With IIC interface
- Onboard USB for PC communication to configure and upgrade
Package Includes :
1 x BGC v3.15 Two-axis brushless gimbal driver Module
1 x Gyro sensor. (with 30 cm cable)
1x Cable
darghya810 (verified owner) –
Good gimbal
darghya810 –
Kenistan Moraes (verified owner) –
Got a faulty board. Robu.in replaced it with a Better one ..
Kenistan Moraes –
Kenistan Moraes (verified owner) –
not sure wat to say. I have a very positive feedback for robu.in . however this product is not up to the mark.Got 2 axis brushless gimbal the board failed in a week’s time . I didn’t have time to claim for warranty at the process is a bit hectic hence had to buy a replacement board for the brushless gimbal. The board didn’t work right out of the box had to return it back to robu. Still awaiting a response from their technical team.5 stars for robu.in . zero stars for this product.
Kenistan Moraes –
Souhardya Das (verified owner) –
don’t buy
Souhardya Das –
Souhardya Das (verified owner) –
Firmware is not matched with GUI
Souhardya Das –
sami (verified owner) –
working well very good product value for money
sami –
Ram Soni (verified owner) –
Original product and received in excellent condition
Ram Soni –
Maj Anirudh Rathore –
good and valrue for money
Maj Anirudh Rathore –
Maj Anirudh Rathore –
good, strong alliminum structu and valrue for money,
Maj Anirudh Rathore –
Maj Anirudh Rathore –
good, strong alliminum structure and valrue for money,
Maj Anirudh Rathore –