Plusivo CL201-A Digital Clamp Meter T-RMS 1999 Counts

This is Plusivo CL201-A Digital Clamp Meter T-RMS 1999 Counts. It’s a RMS Autoranging Multi-Function Clampmeter with 3 and 1/2 digit LCD (1999 Counts). It’s easy to use/operate, accurately measure AC current, test AC and DC voltage, and resistance. CL201-A Digital Clamp Meter T-RMS 1999 Counts also can do continuity and diode tests.

Plusivo CL201-A Digital Clamp Meter T-RMS 1999 Counts can detect the presence of voltage in an electrical circuit or equipment without touching the wires, red LED will flash quickly when an excess electric field is detected, the NCV sensor is at the right upper area of the clamp.

It comes with with Accessories: Test probes, various types of test leads, crocodile clips, mini wire stripper tool, etc, has LCD display with backlight, data hold function, low battery detector, overload protection, auto power OFF after 15 minutes of inactivity.

Plusivo CL201-A Digital Clamp Meter T-RMS 1999 Counts: 

1. Hold / Backlight (BL) Key: Press once to freeze or retain the display reading. Long press to activate the backlight.
2. FUNC Key: Press the “FUNC” key to switch between the different measurements such as between diode and continuity.
3. Digital Display with Back Light: “OL” displayed when exceeding the measuring range or if test probes are connected in reverse polarity.
4. Clamp Jaw Opening Distance: The Jaw is marked with maximum current or voltage value making it safer and easier to use. The design is suitable for one-hand operation.
5. NCV Function: The red LED at the top right of the panel flashes quickly when an excess electric field is detected. It can test electrical circuit or equipment without touching it. “EF” is shown when there is no measurement. It displays changes from “-” to “—-” depending on the strength of the electric field.

Features:

1. Model A has a 3 and 1/2 digit LCD (1999 counts)
2. Autoranging
3. 600 V input voltage protection
4. Auto Power-OFF
5. HOLD function/Back Light
6. Over load indication: “OL” symbol displayed when exceeding the measuring range
7. Low battery indication
8. Continuity: When the resistance value is less than 50 Ω, the buzzer turns on

Package Includes:

1 x Plusivo CL201-A Digital Clamp Meter T-RMS 1999 Counts